New Product Release!! Mazda 3 and Mazdaspeed 3 Oil Cooler Kits

Discussion in 'James Barone Racing' started by JBR, Jan 16, 2017.

Watchers:
18 users.
  1. JBR

    JBR Approved Vendor

    Joined:
    Feb 10, 2016
    Posts:
    194
    Trophy Points:
    63
    Location:
    St. Louis
    Ratings:
    +306 / -0
    [​IMG]

    Details:
    Are you built and tuned? Are you a track Junkie? Are you both? Keeping the motor in your 2.3L DISI engine as cool as possible is going reduce knock and prolong engine life. Preventing the oil from exceeding normal operating temperatures will extend the life of your oil by reducing temperatures that prematurely break it down and increase engine wear. The OEM oil cooler uses a coolant based heat exchanger to keep the oil cool. Adding the JBR oil cooler will reduce the rise in coolant temperatures often seen when on track or during extreme temperature conditions.

    The JBR Mazdaspeed 3 Oil Cooler Kit employs a 19 row core constructed out of aluminum corrugated-fins & internal tubular plates greatly increasing both thermal efficiency and mechanical strength, so you get the smallest, lightest and more importantly, the most efficient oil cooler package.

    [​IMG]

    Custom length commercial grade -10AN fittings and large ID stainless braided lines are the key to minimizing the pressure drop and making for an easy installation.

    [​IMG]

    The polished billet aluminum sandwich plate incorporates an 1/8" NPT port for additional gauges and sensors.

    [​IMG]

    A custom mounting bracket and stainless steel hardware keep the core solidly mounted out front of the radiator maximizing its exposure to incoming airflow resulting in an oil temp reduction of over 28⁰F.

    [​IMG]

    Applications
    • 2004-2013 Mazda 3
    • 2007-2013 Mazdaspeed 3*

    *Does not work with most conventional front mounted intercooler kits (If it could have been done it would have been done)

    Features:
    • Designed and Manufactured in the USA
    • Direct bolt on application
    • Corrugated-fin & tubular plate aluminum core
    • Commercial grade –AN10 fittings and large ID Stainless lines
    • +28⁰ drop in oil temps*

    Includes:
    • 1 Oil cooler core
    • 2 Stainless braided hoses
    • 1 Sandwich plate & 2 1/8” NPT Plugs
    • 1 Application specific core mounting bracket
    • Stainless steel mounting hardware
    • 2 Aluminized fiber glass heat shield sleeves
    • Installation instructions are available in our support section
    • Shipping is free in the US & our Hassle Free Lifetime Warranty is included

    *Ambient temperatures, track and road conditions, traffic and driving style can affect results.
     
    Last edited: Jan 16, 2017
    • Like Like x 5
  2. Raider

    Raider Administraider Administrator Platinum Member

    Joined:
    Jan 28, 2016
    Posts:
    7,041
    Trophy Points:
    113
    Location:
    Behind a Keyboard wearing full body armor
    Ratings:
    +8,147 / -12
    Won't fit 07-08 MS3?
     
    Raider, via an iPhone, Jan 16, 2017
    #2
  3. JBR

    JBR Approved Vendor

    Joined:
    Feb 10, 2016
    Posts:
    194
    Trophy Points:
    63
    Location:
    St. Louis
    Ratings:
    +306 / -0
    Fixed. One day we'll get our posts right on the first shot. TMI
     
    • Like Like x 3
  4. Mauro_Penguin

    Mauro_Penguin Punk in Drublic. #BlackLivesMatter Motorhead Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    1,333
    Trophy Points:
    113
    Location:
    Palm Beach County, FL
    Ratings:
    +1,670 / -2
    That is sexy as hell!!!

    The price is not bad since you don't have to fudge around with sourcing the adapter plate, and comes with a decent size core.

    I didnt see it listed, but does this have a thermostat?

    Do you have any pics of this installed? I wanna see because of that damn FMIC warning.
     
    Last edited: Jan 16, 2017
    Mauro_Penguin, via a mobile device, Jan 16, 2017
    #4
    • Like Like x 2
  5. Grayham

    Grayham Greenie Member

    Joined:
    Jun 9, 2016
    Posts:
    110
    Trophy Points:
    28
    Location:
    Red Oak, OK
    Ratings:
    +59 / -0
    How long are the braided hoses. Wondering if it will reach the wheelwell.
     
    Grayham, via a mobile device, Jan 16, 2017
    #5
    • Like Like x 2
  6. JBR

    JBR Approved Vendor

    Joined:
    Feb 10, 2016
    Posts:
    194
    Trophy Points:
    63
    Location:
    St. Louis
    Ratings:
    +306 / -0
    The hoses are ~4' and it does not come with a thermostat. We found that the thermostat added no benefit. The oil reached operating temperature so quickly and the thermostat just stays open. It's also a mechanical part with the potential to fail.

    GEN 1 and GEN 2 pics below

    20161114_120229.jpg 20161114_121249.jpg 20161124_075906.jpg 20161124_080535.jpg
     
    • Like Like x 2
  7. Mauro_Penguin

    Mauro_Penguin Punk in Drublic. #BlackLivesMatter Motorhead Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    1,333
    Trophy Points:
    113
    Location:
    Palm Beach County, FL
    Ratings:
    +1,670 / -2
    Sexy!
     
    Mauro_Penguin, via a mobile device, Jan 18, 2017
    #7
  8. SavSpeedMS3

    SavSpeedMS3 JRico32 Greenie Member

    Joined:
    Feb 10, 2016
    Posts:
    158
    Trophy Points:
    43
    Location:
    Indianapolis, IN
    Ratings:
    +129 / -0
  9. JBR

    JBR Approved Vendor

    Joined:
    Feb 10, 2016
    Posts:
    194
    Trophy Points:
    63
    Location:
    St. Louis
    Ratings:
    +306 / -0
    Get!!
     
    • Like Like x 1
  10. Mauro_Penguin

    Mauro_Penguin Punk in Drublic. #BlackLivesMatter Motorhead Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    1,333
    Trophy Points:
    113
    Location:
    Palm Beach County, FL
    Ratings:
    +1,670 / -2
    A thought occurred to me this weekend while planning placement.

    What is the added capacity to the running system? Obviously the cooler is made to drain when off, but it looks like you'll need an extra qt while the engine is running?
     
    Mauro_Penguin, via a mobile device, Jan 23, 2017
    #10
    • Like Like x 1
  11. JBR

    JBR Approved Vendor

    Joined:
    Feb 10, 2016
    Posts:
    194
    Trophy Points:
    63
    Location:
    St. Louis
    Ratings:
    +306 / -0
    Just shy of a quart to top it off.
     
    • Like Like x 2
  12. superman

    superman Greenie Member

    Joined:
    Mar 11, 2016
    Posts:
    139
    Trophy Points:
    28
    Location:
    Roundup, MT
    Ratings:
    +69 / -1
    If you run this with the BSD that's 8 qts of oil!
     
    • Like Like x 2
  13. stg_ms3

    stg_ms3 Greenie Member

    Joined:
    Feb 10, 2016
    Posts:
    149
    Trophy Points:
    28
    Location:
    Brandon, MB
    Ratings:
    +63 / -0
    Hard to tell by the pics but will it work with your fmic kit ?


    Sent from my iPhone using Tapatalk
     
    stg_ms3, via a mobile device, Jan 24, 2017
    #13
  14. JBR

    JBR Approved Vendor

    Joined:
    Feb 10, 2016
    Posts:
    194
    Trophy Points:
    63
    Location:
    St. Louis
    Ratings:
    +306 / -0
    Sadly, it does not.
     
    JBR, via a mobile device, Jan 24, 2017
    #14
  15. superman

    superman Greenie Member

    Joined:
    Mar 11, 2016
    Posts:
    139
    Trophy Points:
    28
    Location:
    Roundup, MT
    Ratings:
    +69 / -1
    Any pictures of it installed on a Gen 2?
     
  16. Mauro_Penguin

    Mauro_Penguin Punk in Drublic. #BlackLivesMatter Motorhead Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    1,333
    Trophy Points:
    113
    Location:
    Palm Beach County, FL
    Ratings:
    +1,670 / -2
    More oil is more gooder!

    8qts of oil for a 4 Cyl brings us closer to BMW status.
     
    Mauro_Penguin, via a mobile device, Jan 24, 2017
    #16
    • Like Like x 5
  17. JBR

    JBR Approved Vendor

    Joined:
    Feb 10, 2016
    Posts:
    194
    Trophy Points:
    63
    Location:
    St. Louis
    Ratings:
    +306 / -0
    The tabs can be removed from the OEM crash bar should you choose to do so.

    20161124_075930.jpg 20161124_080535.jpg
     
  18. GCPhotographers

    GCPhotographers Greenie Member

    Joined:
    Mar 21, 2016
    Posts:
    362
    Trophy Points:
    43
    Location:
    DMV for now
    Ratings:
    +146 / -1
    Sucks that it will not fit with an Ultimate Racing FMIC. This is a great idea but there most be a way for to have a kit for FMIC
     

    Attached Files:

    • IM2.jpg
      IM2.jpg
      File size:
      86.5 KB
      Views:
      51
    • IM1.jpg
      IM1.jpg
      File size:
      73.6 KB
      Views:
      49
  19. Awafrican

    Awafrican Moderator Gold Member

    Joined:
    Feb 11, 2016
    Posts:
    3,586
    Trophy Points:
    113
    Location:
    Canada
    Ratings:
    +2,850 / -11
    JBR gets it ;)

    Also love that in the plate there's a fitting to put your oil temp sensor in, although some guys like to run oil temp and pressure and if I'm not mistaken that needs to be 2 fittings.

    If I may why only the one? I assume one reason is one less failure point
     
    Awafrican, via a mobile device, Jan 28, 2017
    #19
  20. Mauro_Penguin

    Mauro_Penguin Punk in Drublic. #BlackLivesMatter Motorhead Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    1,333
    Trophy Points:
    113
    Location:
    Palm Beach County, FL
    Ratings:
    +1,670 / -2
    Never be afraid to cut and grind.
     
    Mauro_Penguin, via a mobile device, Jan 30, 2017
    #20
Loading...

Share This Page

Users Viewing Thread (Users: 0, Guests: 0)