Littleloogy's ADD & Has a Build Diary

Discussion in 'Mazdaspeed 3 Build Diaries' started by Littleloogy, Jan 29, 2017.

Watchers:
33 users.
  1. Littleloogy

    Littleloogy Recovering Speed Addict Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    812
    Trophy Points:
    93
    Location:
    Ripon, CA
    Ratings:
    +1,182 / -0
    Greetings all,

    Scored low mile 2008 last week and well, let's just say it needs a lot Of TLC. Won't get into much detail at their point. But end result, I'm aiming for a 750hp DD that "the old ball and chain" and I can enjoy together.



    Disclaimer:
    This thread will be all over the place. I normally am unorganized, unfocused, stubborn, and forgetful. I have a tendency to snap at times, especially now that I quit drinking. Derailing is encouraged as well as stupid/smart questions. I will also do my best to index this thread in the event that something smart is to happen, but expect me to keep up on it.


    Working on:
    Rewrire "bird nest" fuse box...complete
    Run New AC lines... complete
    Install new Pilot bearing.... complete
    Install Clutch..... complete
    Fix CV boot- Completed
    Install New wheel studs - Completed
    Install updated Slave Cylinder -Completed
    Repair Power steering lines - Compete (even though one line fell off and stained my driveway)

    Current Bolt on Mods
    Corksport Intake manifold
    Corksport 72 MM TB
    CS Stage 2 RMM
    SS break lines
    CS Big Brake Kit
    CS Adjustable Shifter
    CS TMIC
    Forge V1 BPV

    Engine build details:
    New Long Block from Mazda
    SP63 Wisco Custom 87.5mm 9.5:1 Pistons
    H11 12mm Head-studs w/ OEM head gasket
    ARP2000 10mm Main-studs
    Manley I-Beam Rods
    CS Injector Seals
    ARP625+ Rod Bolts
    Clevite Rod Bearings
    OEM Main Bearings
    Ported Intake & Exhaust Ports
    Crower 65lb Springs
    Pinned Cams
    Key'd Crank & Sprockets
    SouthBend Stage 3 Endurance Clutch
    Balance Shaft Delete
    Corksport Fuel Pump Internals



    Air and Fueling (In progress)
    16W manifold w/ port infection
    CorkSports New Big Turbo (Two Weeks)
    Injector Dynamics 1050x
    Split Second Controller
    Duel Pump from Lincoln MKZ
    Fuel Type E85






    Sent from my iPhone using Tapatalk Pro
     
    Last edited: Feb 26, 2018
    Littleloogy, via a mobile device, Jan 29, 2017
    #1
    • Like Like x 3
  2. Awafrican

    Awafrican Moderator Gold Member

    Joined:
    Feb 11, 2016
    Posts:
    3,586
    Trophy Points:
    113
    Location:
    Canada
    Ratings:
    +2,851 / -11
    750hp daily, I love it
     
    Awafrican, via a mobile device, Jan 29, 2017
    #2
    • Like Like x 2
  3. Littleloogy

    Littleloogy Recovering Speed Addict Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    812
    Trophy Points:
    93
    Location:
    Ripon, CA
    Ratings:
    +1,182 / -0
    First goal will be to fix the molested fuse box and install new circuits for accessories to be installed at a later date.
    [​IMG]


    Sent from my iPhone using Tapatalk Pro
     
    Littleloogy, via a mobile device, Jan 29, 2017
    #3
  4. davychronic

    davychronic Greenie Member

    Joined:
    Aug 25, 2016
    Posts:
    426
    Trophy Points:
    63
    Location:
    Iowa
    Ratings:
    +352 / -0
    Oh my, what drugs are people on when they do that kind of shit. That looks like a ton of fun. What turba ya thinkin about?
     
    davychronic, via a mobile device, Jan 29, 2017
    #4
    • Like Like x 2
  5. Littleloogy

    Littleloogy Recovering Speed Addict Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    812
    Trophy Points:
    93
    Location:
    Ripon, CA
    Ratings:
    +1,182 / -0
    I'm not sure. His mindset was to go Full Race car and I think he was relocating the fuse box to somewhere under the frame? But since this will be a daily it definitely needs to be back up and out of the elements.

    This turbo and manifold if I don't go broke:
    http://edgeautosport.com/precision-turbo-kit-v-band-journal-bearing-turbo-mazdaspeed-3-2007-2013/


    Sent from my iPhone using Tapatalk Pro
     
    Littleloogy, via a mobile device, Jan 29, 2017
    #5
  6. davychronic

    davychronic Greenie Member

    Joined:
    Aug 25, 2016
    Posts:
    426
    Trophy Points:
    63
    Location:
    Iowa
    Ratings:
    +352 / -0
    davychronic, via a mobile device, Jan 29, 2017
    #6
  7. Littleloogy

    Littleloogy Recovering Speed Addict Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    812
    Trophy Points:
    93
    Location:
    Ripon, CA
    Ratings:
    +1,182 / -0
    Well, great minds do think alike. What are you doing for aux fueling?


    Sent from my iPhone using Tapatalk Pro
     
    Littleloogy, via a mobile device, Jan 29, 2017
    #7
  8. davychronic

    davychronic Greenie Member

    Joined:
    Aug 25, 2016
    Posts:
    426
    Trophy Points:
    63
    Location:
    Iowa
    Ratings:
    +352 / -0
    Im running a size do7 100% meth nozzle and then kinda my own homebrew pi system on the dm fost im adapter. Have 4 size do2 nozzles on that tapping off low side feed to hpfp and a bigger dw fp.

    [​IMG]

    I have a fuel pressure gauge to monitor that system. Have a wideband failsafe. Going to control it with my meth controller that has two outputs. So the meth and aux fuel can be controlled independently but on the same controller. Also have a 10 row air to air oil cooler im adding to help out since my pte 5858 is oil cooled. Its a big project, looking forward to tuning it.
     
    davychronic, via a mobile device, Jan 29, 2017
    #8
    • Like Like x 1
  9. Littleloogy

    Littleloogy Recovering Speed Addict Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    812
    Trophy Points:
    93
    Location:
    Ripon, CA
    Ratings:
    +1,182 / -0
    Woah! Did not realize that the ST IM could be paired with the MZR. Had to exercise the google on that one. Sounds like a great plan actually. Look forward to seeing it in action. Nice to know there are more inexpensive manifold options out there.

    You like Mountain Dew? I see the 3 empty cans of it on your under tray. :)


    Sent from my iPhone using Tapatalk Pro
     
    Littleloogy, via a mobile device, Jan 29, 2017
    #9
  10. davychronic

    davychronic Greenie Member

    Joined:
    Aug 25, 2016
    Posts:
    426
    Trophy Points:
    63
    Location:
    Iowa
    Ratings:
    +352 / -0
    Only thing that can keep me up at night after the kiddo is asleep haha
     
    davychronic, via a mobile device, Jan 29, 2017
    #10
    • Like Like x 1
  11. Awafrican

    Awafrican Moderator Gold Member

    Joined:
    Feb 11, 2016
    Posts:
    3,586
    Trophy Points:
    113
    Location:
    Canada
    Ratings:
    +2,851 / -11
    Bruh where have you been? Under a rock? The FoST mani with DM plate is freaking tits!
     
    Awafrican, via a mobile device, Jan 29, 2017
    #11
    • Like Like x 3
  12. SharksInSpace

    SharksInSpace Planets and shit. Silver Member

    Joined:
    Apr 5, 2016
    Posts:
    1,739
    Trophy Points:
    113
    Location:
    Middle Coast
    Ratings:
    +2,149 / -14
    DM gots that FoST hookup. Just need a TMIC option. :p
     
    SharksInSpace, via a mobile device, Jan 29, 2017
    #12
    • Like Like x 1
  13. Littleloogy

    Littleloogy Recovering Speed Addict Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    812
    Trophy Points:
    93
    Location:
    Ripon, CA
    Ratings:
    +1,182 / -0
    I've been minding my own damn business, that's where I have been. Lol. I've been out of the game for about a year. Wonder what else is new that I missed.


    Sent from my iPhone using Tapatalk Pro
     
    Littleloogy, via a mobile device, Jan 30, 2017
    #13
  14. Awafrican

    Awafrican Moderator Gold Member

    Joined:
    Feb 11, 2016
    Posts:
    3,586
    Trophy Points:
    113
    Location:
    Canada
    Ratings:
    +2,851 / -11
    CPE intake manifold flopped hard, some awesome numbers down the drag, CS turbo is meh, BNR S3/4 still the way to go over it. That's about it
     
    Awafrican, via a mobile device, Jan 30, 2017
    #14
    • Like Like x 3
  15. Littleloogy

    Littleloogy Recovering Speed Addict Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    812
    Trophy Points:
    93
    Location:
    Ripon, CA
    Ratings:
    +1,182 / -0
    That is not good to hear. Looked like a promising design. I'll most likely run a PnP manifold with a PnP TB.



    Sent from my iPhone using Tapatalk Pro
     
    Littleloogy, via a mobile device, Jan 30, 2017
    #15
  16. davychronic

    davychronic Greenie Member

    Joined:
    Aug 25, 2016
    Posts:
    426
    Trophy Points:
    63
    Location:
    Iowa
    Ratings:
    +352 / -0
    the fost im is like $50 add the mani adapter for like $250 i think and you will have a much better mani for cheaper than a pnp
     
    davychronic, via a mobile device, Jan 31, 2017
    #16
  17. Littleloogy

    Littleloogy Recovering Speed Addict Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    812
    Trophy Points:
    93
    Location:
    Ripon, CA
    Ratings:
    +1,182 / -0
    Should have noted that the ports Manifold came with the car. Unless the Fost and adapter plate outflows a PnP stock manifold?


    Sent from my iPhone using Tapatalk Pro
     
    Littleloogy, via a mobile device, Jan 31, 2017
    #17
  18. davychronic

    davychronic Greenie Member

    Joined:
    Aug 25, 2016
    Posts:
    426
    Trophy Points:
    63
    Location:
    Iowa
    Ratings:
    +352 / -0
    davychronic, via a mobile device, Jan 31, 2017
    #18
  19. Littleloogy

    Littleloogy Recovering Speed Addict Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    812
    Trophy Points:
    93
    Location:
    Ripon, CA
    Ratings:
    +1,182 / -0
    [​IMG]

    I'll just sell it to a local and get the FoSt manifold setup then. If it outflows and looks better IMO, It's a no brainer. Also will sell off the APv3 and move over to VT while I'm at it.


    Sent from my iPhone using Tapatalk Pro
     
    Littleloogy, via a mobile device, Jan 31, 2017
    #19
  20. davychronic

    davychronic Greenie Member

    Joined:
    Aug 25, 2016
    Posts:
    426
    Trophy Points:
    63
    Location:
    Iowa
    Ratings:
    +352 / -0
    should be able to sell the ap easier if you throw the accesstuner install file on a cheap usb stick since cobb decided to fail while you were on your sabbatical. Im pretty sure youll need front mount status for the fost mani unless you can engineer some rear tmic mounts. I think it looks better and it is lighter.
     
    • Like Like x 1
Loading...

Share This Page

Users Viewing Thread (Users: 0, Guests: 1)