Valve Cleaning, How To Do It and Why?

Discussion in 'Corksport' started by Brett@Corksport, Jan 5, 2018.

Watchers:
16 users.
  1. Brett@Corksport

    Brett@Corksport Former Vendor

    Joined:
    Aug 29, 2016
    Posts:
    62
    Trophy Points:
    33
    Location:
    Vancouver, WA
    Ratings:
    +127 / -1
    Happy New Year Mazdaspeed Family!

    I wanted to Share a Blog I wrote last year, as I feel it would benefit a few DIY guys. As most of you know, valve cleaning is a regular maintenance procedure that many of us have gone through, or still need to. I get asked ALL the time by up and coming Mazdaspeed owners, or even new Skyactiv owners on how to clean the intake valves. For those that are not super familiar with this process, this is your one stop tutorial on what needs to be done, and with a full tool list, and a video!

    Hope you enjoy.

    https://corksport.com/blog/how-to-clean-your-intake-valves/


    Regards,
    Brett@CS
     
    • Like Like x 6
  2. Mauro_Penguin

    Mauro_Penguin Punk in Drublic. #BlackLivesMatter Motorhead Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    1,333
    Trophy Points:
    113
    Location:
    Palm Beach County, FL
    Ratings:
    +1,670 / -2
    Very nice write up. This will help to guide a lot of people doing this for the first time.

    I did this last weekend and appreciate your recommendation to everyone on the long picks.

    I used a long round file and 90* pick to loosen up the crud. I did NOT use B12. It's already kind of a messy job without it. Between scraping with the picks and the media blasting, I found it to be enough.

    Good stuff!
     
    Mauro_Penguin, via a mobile device, Jan 6, 2018
    #2
  3. Brett@Corksport

    Brett@Corksport Former Vendor

    Joined:
    Aug 29, 2016
    Posts:
    62
    Trophy Points:
    33
    Location:
    Vancouver, WA
    Ratings:
    +127 / -1
    Definitely appreciate you taking the time to give me some feedback! Those long picks are certainly needed. Sounds like that file you used is basically the same thing. As long as it works!
     
    • Like Like x 1
  4. SharksInSpace

    SharksInSpace Planets and shit. Silver Member

    Joined:
    Apr 5, 2016
    Posts:
    1,739
    Trophy Points:
    113
    Location:
    Middle Coast
    Ratings:
    +2,149 / -14
    Same process we used, except long flathead screwdrivers for the scraping bc we didn't have picks lol. That B12 really does the trick if you let it soak for a bit, then alternate scrubbing and blasting until clean.
     
  5. Brett@Corksport

    Brett@Corksport Former Vendor

    Joined:
    Aug 29, 2016
    Posts:
    62
    Trophy Points:
    33
    Location:
    Vancouver, WA
    Ratings:
    +127 / -1
    yeah absolutely. Just tedious! But the final results are always pleasing.
     
    • Like Like x 1
  6. rusty

    rusty Greenie Member

    Joined:
    Apr 19, 2016
    Posts:
    73
    Trophy Points:
    18
    Location:
    Los Angeles, CA
    Ratings:
    +51 / -0
    Just did mine a few weeks ago. 5 Hours start to finish. I don't have compressed air so I used B12, engine brushes and picks. The difference between dirty valves and clean valves is crazy. My engine runs so Fing smooth now.
     
    • Like Like x 2
  7. Db09ms3

    Db09ms3 Silver Member

    Joined:
    Apr 20, 2017
    Posts:
    456
    Trophy Points:
    63
    Location:
    AZ
    Ratings:
    +457 / -1
    Good to know we don't need a damn air compressor. I'll likely do the Rusty method myself
     
  8. rusty

    rusty Greenie Member

    Joined:
    Apr 19, 2016
    Posts:
    73
    Trophy Points:
    18
    Location:
    Los Angeles, CA
    Ratings:
    +51 / -0
    I've done it 4 times so far. Gets easier every time.

    The best pointer I can give you is to remove the battery and entire intake. Trust me it take like 15 extra minutes but it saves you hours. The first time I left the intake in place added an 2 and a half extra hours of fighting the EGR dump tube and various bolts.

    Also, if you're using engine brushes triple check that you vacuumed any bristles that may have dislodged while cleaning. You don't want that crap getting in your engine.

    Lastly, I recommend replacing the intake manifold gasket with a thermal insulating gasket from JBR while you're at it. Once that stock gasket is removed it's prone to leaking.
     
    • Like Like x 2
  9. Mauro_Penguin

    Mauro_Penguin Punk in Drublic. #BlackLivesMatter Motorhead Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    1,333
    Trophy Points:
    113
    Location:
    Palm Beach County, FL
    Ratings:
    +1,670 / -2
    The manifold gaskets from Adapted Performance are nice too.

    That's why they recommend the long picks to loosen up the crud. No worries about stray bristles.
     
    Mauro_Penguin, via a mobile device, Jan 12, 2018
    #9
    • Like Like x 3
  10. SharksInSpace

    SharksInSpace Planets and shit. Silver Member

    Joined:
    Apr 5, 2016
    Posts:
    1,739
    Trophy Points:
    113
    Location:
    Middle Coast
    Ratings:
    +2,149 / -14
    AP gasket FTW
     
    • Like Like x 1
  11. macdiesel

    macdiesel Greenie Member

    Joined:
    Feb 11, 2016
    Posts:
    373
    Trophy Points:
    63
    Location:
    You Betchya, MI
    Ratings:
    +358 / -0
    On my spring to-do list. We’ll see how much carbon on 86k.
     
    macdiesel, via an iPad, Jan 26, 2018
    #11
  12. Finch204

    Finch204 Greenie Member

    Joined:
    Feb 22, 2016
    Posts:
    396
    Trophy Points:
    43
    Location:
    Texas
    Ratings:
    +179 / -0
    What if you already have the JBR TIG? Do you still have to replace after each cleaning or can you re-use it?
     
  13. SharksInSpace

    SharksInSpace Planets and shit. Silver Member

    Joined:
    Apr 5, 2016
    Posts:
    1,739
    Trophy Points:
    113
    Location:
    Middle Coast
    Ratings:
    +2,149 / -14
    • Like Like x 6
  14. Littleloogy

    Littleloogy Recovering Speed Addict Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    812
    Trophy Points:
    93
    Location:
    Ripon, CA
    Ratings:
    +1,182 / -0
    +1 for AP Gasket. Best on the market IMO. And, it is reusable.


    Sent from my iPhone using Tapatalk Pro
     
    Littleloogy, via a mobile device, Feb 12, 2018
    #14
    • Like Like x 1
  15. rusty

    rusty Greenie Member

    Joined:
    Apr 19, 2016
    Posts:
    73
    Trophy Points:
    18
    Location:
    Los Angeles, CA
    Ratings:
    +51 / -0
    No you can reuse it. I've cleaned a couple times and reused the JBR tig no issues.
     
    • Like Like x 1
  16. MommaA15

    MommaA15 Greenie N00B Member

    Joined:
    Mar 18, 2018
    Posts:
    1
    Trophy Points:
    1
    Location:
    TN
    Ratings:
    +0 / -0
    About to attempt to clean mine.
    , thanks for the info guys.
     
  17. Darthxar

    Darthxar Greenie Member

    Joined:
    Feb 11, 2016
    Posts:
    856
    Trophy Points:
    93
    Location:
    Marseilles, IL
    Ratings:
    +710 / -1
    I really need to do mine this spring. Debating buying a compressor or trying the rusty method without blasting. Skipping the blasting would reduce the mess in my garage.
     
  18. Brett@Corksport

    Brett@Corksport Former Vendor

    Joined:
    Aug 29, 2016
    Posts:
    62
    Trophy Points:
    33
    Location:
    Vancouver, WA
    Ratings:
    +127 / -1
    Honestly the mess really isn't all that bad if you do a good amount of wrap over the engine bay. Typically, I just have to wrap up the plastic in the end, and all the walnut goes in the trash with it.

    If you have the hose routed through the shopvac, it gets 90% of the media :)


    -Brett
     
    • Like Like x 1
  19. Brett@Corksport

    Brett@Corksport Former Vendor

    Joined:
    Aug 29, 2016
    Posts:
    62
    Trophy Points:
    33
    Location:
    Vancouver, WA
    Ratings:
    +127 / -1
    Glad that it was helpful!!
     
  20. macdiesel

    macdiesel Greenie Member

    Joined:
    Feb 11, 2016
    Posts:
    373
    Trophy Points:
    63
    Location:
    You Betchya, MI
    Ratings:
    +358 / -0
    Spring is here and about to clean my valves at 120k. Last time I had the manifold off the valve stems had some hellacious carbon up on them. Any other way to find TDC besides turning the crank by hand? In gear and spin a wheel?
     
    macdiesel, via an iPad, Mar 19, 2019
    #20
Loading...

Share This Page

Users Viewing Thread (Users: 0, Guests: 0)