DIY Port injection set up

Discussion in 'Mazdaspeed 3/6 Fuel, NOS, Meth, & Water Injection' started by Maisonvi, Jul 11, 2016.

Watchers:
42 users.
  1. bazza

    bazza Greenie N00B Member

    Joined:
    Nov 13, 2017
    Posts:
    8
    Trophy Points:
    3
    Location:
    uk
    Ratings:
    +1 / -0
    Do you think fuel filter's may be required as iv been reading about pre and post ones ?
     
  2. Maisonvi

    Maisonvi Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    1,397
    Trophy Points:
    113
    Location:
    South Haven, MI
    Ratings:
    +1,992 / -0
    I used a pre pump filter sock similar but larger than what is used on an oem pump

    Sent from my SM-G950U using Tapatalk
     
    Maisonvi, via a mobile device, Nov 26, 2017
    #62
  3. bazza

    bazza Greenie N00B Member

    Joined:
    Nov 13, 2017
    Posts:
    8
    Trophy Points:
    3
    Location:
    uk
    Ratings:
    +1 / -0
    hey mate, can you give me the link for the 1000cc injectors please and the list as its the last day of the sales ?
     
  4. Maisonvi

    Maisonvi Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    1,397
    Trophy Points:
    113
    Location:
    South Haven, MI
    Ratings:
    +1,992 / -0
    Im using Injector dynamics ID1000 injectors. I dont have a link to where I bought them, because I got them off a local. But if you just web search you should be able to find them no issues. You dont have to use that brand though, any 48 mm injectors. You can get adapters for the plugs so thats no big deal which ever they are (but the split second controller comes with EV1 plugs I think)
     
    • Like Like x 1
  5. bazza

    bazza Greenie N00B Member

    Joined:
    Nov 13, 2017
    Posts:
    8
    Trophy Points:
    3
    Location:
    uk
    Ratings:
    +1 / -0
    cheers
     
  6. Clintonicms3

    Clintonicms3 Greenie Member

    Joined:
    Jun 4, 2016
    Posts:
    16
    Trophy Points:
    3
    Location:
    Canton Ga
    Ratings:
    +12 / -0
    Not to revive an oldish thread I’m trying to go this route as well. I currently ran a 6th port setup but ran out of fuel so I’m looking to do the st mani with the Damond pi. Now is it possible to run returnless on this setup or is that asking for trouble? I have a aem 50-1220 pump that’s good for 320lph at 43psi.
     
    Clintonicms3, via an iPhone, Jan 31, 2018
    #66
  7. alexwlwsn

    alexwlwsn Greenie Member

    Joined:
    Feb 10, 2016
    Posts:
    697
    Trophy Points:
    93
    Location:
    Harco MD
    Ratings:
    +1,038 / -0
    Referencing https://www.aeromotiveinc.com/tech-help/faqs/faq-340-stealth-fuel-pumps/ (different pump but similar flow) it seems that at this flow a returnless system isn't too great of an idea. I know my Walbro 450 was ran returnless for a bit (by the previous owner) but then there was overheating issues and the system was converted to a return system.

    So, I'm sure you can run it returnless but you're more likely to burn through pumps.
     
  8. Maisonvi

    Maisonvi Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    1,397
    Trophy Points:
    113
    Location:
    South Haven, MI
    Ratings:
    +1,992 / -0
    Yeah I think returnless is possible, but if you are already maxing out a 6th port system, I would guess you are at the limit. Luckily, its really not too bad to make the system returned. the hardest part is fittings in the stock basket, which really you could just use the stock feed line still as it is, and just run your own return. (I chose to run the stock line as the return but that meant no using a drop in pump)

    You might have to calculate the stock feed line size to see if its big enough for your goals, should be easy enough to do.
     
  9. Clintonicms3

    Clintonicms3 Greenie Member

    Joined:
    Jun 4, 2016
    Posts:
    16
    Trophy Points:
    3
    Location:
    Canton Ga
    Ratings:
    +12 / -0
    Any pics of how you did this? My goal is right around 580-600. Getting a jmf v2 and running whatever you guys think would be best. I’m looking at doing return but don’t see what runs to the hpfp, port rail, and then where the return actually goes. I guess I’m dumb here lol trying to figure it out. Thanks @alexwlwsn @Maisonvi
     
    Clintonicms3, via an iPhone, Feb 2, 2018
    #69
  10. alexwlwsn

    alexwlwsn Greenie Member

    Joined:
    Feb 10, 2016
    Posts:
    697
    Trophy Points:
    93
    Location:
    Harco MD
    Ratings:
    +1,038 / -0
    Well my setup was made by SpeedPerf6rmanc3 and had a custom Squash tophat... So that might be difficult to replicate on your own.

    -6an feed line though and then the return was through the stock feed.
     
  11. Maisonvi

    Maisonvi Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    1,397
    Trophy Points:
    113
    Location:
    South Haven, MI
    Ratings:
    +1,992 / -0
    I have pics, in this thread, or maybe its my build thread. When I get to a computer I will link them

    Sent from my SM-G950U using Tapatalk
     
    Maisonvi, via a mobile device, Feb 2, 2018
    #71
  12. Clintonicms3

    Clintonicms3 Greenie Member

    Joined:
    Jun 4, 2016
    Posts:
    16
    Trophy Points:
    3
    Location:
    Canton Ga
    Ratings:
    +12 / -0
    Sounds good @Maisonvi ill look on the threads and see if I can find it
     
    Clintonicms3, via an iPhone, Feb 2, 2018
    #72
  13. Eroler1

    Eroler1 NPC Greenie Member

    Joined:
    Jan 27, 2018
    Posts:
    182
    Trophy Points:
    28
    Location:
    Aincard
    Ratings:
    +81 / -5
    @Maisonvi hey bro, are you interested in selling/making one of your walbro 450 mounts? I'm pretty much copying your setup, many guys said to run surge tank but not nuff funds for that, I've seen justin@freektune did his walbro, like just drop it and zip tied? Will that work? And just drilling top hat for return? Sounds simple but feels like I'm missing something lol
     
    Eroler1, via an iPhone, Feb 2, 2018
    #73
  14. Maisonvi

    Maisonvi Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    1,397
    Trophy Points:
    113
    Location:
    South Haven, MI
    Ratings:
    +1,992 / -0
    I would have to see if I took measurements of how i did it. If you plan on using a 450 didnt use the stock feed line for it. My feed was the one I added, and the stock was the return. Really drilling the basket for the feed wasnt bad, but figuring out fittings was a bit of an issue, mostly because I ordered the wrong one, and just ended up making my own.

    I havent had a need for a surge tank even tracking my car multiple times on this set up. I dont make crazy power (just over 500 on my 3076) but everything seems great so far. lots of DD and a track time without problems. That said, a surge tank is probably the better solution, but I did this to try something out and it worked.

    @Clintonicms3 post 22 in here is how I mounted it in the basket and how I did the feed line. If you need more pics I can dig up anything I have.
     
  15. Eroler1

    Eroler1 NPC Greenie Member

    Joined:
    Jan 27, 2018
    Posts:
    182
    Trophy Points:
    28
    Location:
    Aincard
    Ratings:
    +81 / -5
    @Maisonvi thanks for the reply bro, yeah I've been reading ton of setup and I figure I'll go with this route, intank walbro 450>inline filter>tee>hpfp/pi rail>fpr> return (stock feed line converted to return. My only concern right now is how I'm going to mount the 450 in tank, and for the wiring Ill prolly just use a relay and use the oem wire as signal and pump is direct to the battery. My other option is nate from newage the new upcoming kit they are making have surge tank for $2150, that is regulated surge tank from radium.
     
    Eroler1, via an iPhone, Feb 2, 2018
    #75
  16. Clintonicms3

    Clintonicms3 Greenie Member

    Joined:
    Jun 4, 2016
    Posts:
    16
    Trophy Points:
    3
    Location:
    Canton Ga
    Ratings:
    +12 / -0
    @Maisonvi if you can provide all the parts used to run the return and what fittings and what you did to your fuel basket for the return and everything. I’m being stupid and don’t know shit. This is just something I only want to do once
    [doublepost=1517693926][/doublepost]
    So did you go with the first way or second way? And I’m such a doofus
     
    Clintonicms3, via an iPhone, Feb 3, 2018
    #76
  17. Maisonvi

    Maisonvi Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    1,397
    Trophy Points:
    113
    Location:
    South Haven, MI
    Ratings:
    +1,992 / -0
    I'm out right now. I will do a write up here for you and everyone else. I've been saying I will forever

    Sent from my SM-G950U using Tapatalk
     
    Maisonvi, via a mobile device, Feb 3, 2018
    #77
  18. Maisonvi

    Maisonvi Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    1,397
    Trophy Points:
    113
    Location:
    South Haven, MI
    Ratings:
    +1,992 / -0
    Ok, I wrote up all the parts I used and how I laid everything out. The only thing I dont have is the compression fittings as I bought them locally, but they are just 6an male to 5/16 compression fittings. (if you cant find them let me know and I will look up a part number)

    Ignore the lengths and what not of the lines, I just used what space I had available on the page. I think the hose going from the basket to the HPFP was like 10 ft, the rail to the FPR was like 3, and then another 2 to the fire wall. Depends on how you route it, but I think I used about 15 ft total. Kinda a guess at this point tough.

    All the fittings and hose were ordered from here (and thus the part numbers) it was the cheapest I could find at the time for the fittings I wanted. https://www.verociousmotorsports.com/

    Fuel Layout.jpg

    Other parts I used:
    AEM Fuel Pressure Regulator (Part Number: 25-302BK):
    http://www.aemelectronics.com/produ.../universal-adjustable-fuel-pressure-regulator

    Walbro 450 pump (Part Number: F90000267)
    http://walbrofuelpumps.com/walbro-f90000267-fuel-pump-e85

    Walbro install kit, to connect to the stock system as my just had loose wire leads, and gave me a filter sock. I dont think I ended up using the connector and just cut and soldered the one off the stock pump on to mine. I also used fuel rated shrink wrap FYI.
    www.amazon.com/gp/product/B00FMUZMOW/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

    For the return drain hose, this is what I used so it would dump back into the bucket.
    www.amazon.com/gp/product/B001R5XX56/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

    Injectors: Injector Dynamics ID1000, I dont think they make these anymore, they are now ID1050s But use what makes sense for your goals

    As far as parts I made, the holder for the Walbro is mine, and then I had to modify the bulk head fitting to make it work as a hose fitting. There might be a fitting out there that just does this, I just had this one and made it work. I did have to trim out the inside of the basket to get a flat spot to mount the bulkhead fitting. I did it with a razor blade and a dremel tool. Easy work. Ive attached pictures of what I did in case I haven't posted them before.

    Stock Bulkhead Fitting
    16344119_10109750144903274_427827348_n.jpg

    Modified
    16344254_10109750681537854_1609618734_n.jpg

    Mounted from above:
    16358695_10109752785915664_1148106755_n.jpg

    What I had to do underneath:
    16344488_10109752786609274_1692407136_n.jpg

    Final installed pic:
    16900431_10109897525341694_1083869129_n.jpg

    let me know if you have questuions
     
    Last edited: Feb 4, 2018
    • Like Like x 6
  19. Clintonicms3

    Clintonicms3 Greenie Member

    Joined:
    Jun 4, 2016
    Posts:
    16
    Trophy Points:
    3
    Location:
    Canton Ga
    Ratings:
    +12 / -0
    So I have a fuel pump in tank that fit in stock location do I have to modify all this to my basket to make this work? What’s confusing is using the stock feed line to return fuel. I’m being dumb af but I guess I’m just a little confused about that. Thank you for all your help and insight and part numbers you’ve been a tonnn of help @Maisonvi
     
    Clintonicms3, via an iPhone, Feb 4, 2018
    #79
  20. Maisonvi

    Maisonvi Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    1,397
    Trophy Points:
    113
    Location:
    South Haven, MI
    Ratings:
    +1,992 / -0
    In your case you would use the stock feed line and connect to the firewall just like I have but go to the HPFP instead of the regulator. And then from the regulator you would go back to the tank with a DIY return line. I can draw up a diagram tomorrow when I'm back at work (where I saved this file)

    It's all the same bits, but different routing

    Sent from my SM-G950U using Tapatalk
     
    Maisonvi, via a mobile device, Feb 4, 2018
    #80
Loading...

Share This Page

Users Viewing Thread (Users: 0, Guests: 0)