Post S3 install thread because KiwiFail

I had lps3 on my speed and had no rust. Now I don't have to worry about rust anymore.

crapatalk it sucks for free

 

Interesting..

 

LPS 3 Premier Rust Inhibitor, 1 Gallons

You can do at least 3 cars with this much. Just need to find a sprayer. I could send you the bottle sprayer I had for when I used it.

crapatalk it sucks for free

 

Idt I'm going to need that much lol! I'll get back to you with that. Thanks bro!

I'm thinking to use Corroseal first on the rust and then maybe paint it over with some kind of epoxy paint and maybe I can use this thing for the last coat.

 

OOVERKILLLL lol

 

Hi Bb where have you been?

 

So it’s been a while since I last updated this thread. I’ve done some stuff over the last few weeks


Undercoated/resprayed the under body









Replaced FSB bushings and brackets just as pre-cautionary. Thanks @JohnnyTightlips;





We didn’t feel like messing with the stock exhaust so.... cut you go lol










Finally assembled the crank and pistons are ready to go in. The machine shop numbered the pistons but didn’t do the rods. We weighed them and pretty happy with the results















Decided Im going to paint the calipers, VC and some stuff with this color because ricer



And then these showed up yesterday. Christmas came early



Thanks to @Maisonvi; for sending me some coolio stuff. Love them KenDeals

Next on the list = Oil and water pump, fuel cell and fuel delivery kit (I may have found something for this), Split Second controller (already built and awaiting shipment).


Stay tuned for more #NoobBuilt

 

#YellowFacePerformance

 

LOL! I like that actually!

 

I'm going to setup gaymeetup web sites under the yellow performance banner. If you want to buy the web address name pm me.

Tapatalk, it sucks for free!

 

The pistons were numbered because the pwc for each bore is specific to that piston. Did they file the rings too?

 

Yes they did. I also asked them to leave the rings in the pistons.

 

Out of curiosity, what did they set end gaps at?

 

.020 / 0.022

I believe this is also the same setup @Sho; is running right now.

 

You shouldn't have any issues with gaps like that. Everyone builds engines differently, I'm a follower of larger second ring gaps.

 

I told her that... somehow she didn't like that...

 

Everyone loves loose gaps?

Tapatalk, it sucks for free!

 

Last weekend was a good one. Did this



I’m going to pick up the head this Friday.

Also picked up a set of tires for my gen2 stockers since Im thinking to stock it out soon (maybe. Some of you know I change my mind like @monkey.bones.007; change his underwear)

 

I never change my underwear....

Tapatalk, it sucks for free!

 

Ohh baby!