Raider's Review of the Damond Motor Mounts on Christine, my Gen1 Mazdaspeed3

First and foremost, and apology to @Matt@DM for the delay. OK kids, here we go. Wall o Text warning! Christine had around 152,000 miles on here at time of install. Over the near 13 years of ownership, have run at least 5 rear mounts, 3 trans mounts, and 1 passenger mount. Last year, I noticed some issues, linked to just 60-70K miles on the rear mount I had. I basically stole a used DM rear mount, and some noise/vibes reduced. Fast forward a year, and the nearly 80K miles on the passenger and trans mounts I had on it, were showing their age. Vibes, shift issues. BUT, and I stress this, I have removed and reinstalled both many times and ZERO catastrophic failures. In fact, I could probably have just updated the side mount bushings (and still can) and be good to go. These are the Hurricane Sandy mounts I got from KMAC on MSF old. But then I got an offer I could not refuse, and the option to potentially quiet the ride down for my commuter car, as I went from 8 miles a day when I got them, to nearly 75, hauling kids to and from school and then work. I just needed some quiet and vibration reduction.

So I had the opportunity to test out a couple scratch and dent Damond Motorsports mounts for the passenger and transmission side after I inquired if he had a pair.

Install meat happened 3 1/2 and 5,000 miles ago, and went in easily with the directions pretty dang clear. Awesome help form the local Nator in getting it done, as well as knocking out some amazing BBQ!

Immediately, shifting was smooth, no more missed shifts, and it was a LOT quieter than my old tried and true mounts were. Made for a lot easier drive. Super impressed in just everything, and just like people have been saying, they are quieter and smoother, and pretty dang spiffy.

Thank you for your support of Mazdaspeeds.org, @Matt@DM!

Get the full set and keep your powertrain in check!
https://damondmotorsports.com/colle...ducts/motor-mount-packages?variant=4723104452

 

My engine doesn’t even move on start up with the Damond mounts. And it may help that a certain someone installed the passenger mount for me. @Matt@DM

 

Me n Nator did it. Just a few, @Mauro_Penguin was there too.

 

I was under the car at some point. @neganox and @Shampu did a bit too.

Told you those motor mounts are awesome. Neal had them on his car too, before the poor guy got conned into buying a GM. Poor bastard.

 

I secretly hope DM and HTP make parts for the LS3 someday.

 

@Raider; which version passenger mount you get?


Sent from my iPhone using Tapatalk

 

IIRC he has the new version with the steel plate design.

I haz de olde aluminum block design.

 

But do you Red and Gold?




Sent from my iPhone using Tapatalk

 

Black with red, New version.

 

Negative... young Danzig and Joey Ramone came to me in a dream and instructed me to get black on black.

 

Red anodize ftw

 

Don't forget Davey.
"At the end of my cul de sac, Davey Havok's house is painted black"

 

Glad you're liking the mounts, seems like they're definitely the way to go.

I really got get myself fully mounted from Damond, currently Cobb RMM and OEM pmm/tmm. Now if they made a black with white set that'd be amazing IMO.

 

The bushings are removable so you could powdercoat them whatever color. That'd be pretty cool actually.

 

Now that's an idea! Do you mean powder coat the bushing? Because that's what I'd want white not the metal part. got a bit of black and white theme going, although white is a PITA to keep clean especially up here in Canada...but that's not the point of this thread.

 

He does not mean powder coat the bushing.

 

Haha I meant powdercoat the metal parts. The bushings are OTS so maybe DM's supplier could cook you up a set in white?

 

I figured, I'm just being a smart arse. Yeah perhaps something I could look into down the road.

 

Doubt energy suspensions makes white bushings.