No codes, car right everything was working fine. I did but a used one off eBay for less than 100. I was able to reprogram with FORScan. Do NOT...
I had to replace my PCM. Currently re-programming keys using forscan.
Using ForScan I can see the PCM trying to turn on the Fuel Pump Relay when I turn the car on, while I'm cranking, and a few seconds after I stop...
I've verified that the wire grounding wire between the circuit relay and PCM is good. My Fuel Pump Resistor is at 0.4ohms. I have also bypassed...
I've been having this issue for a long time and I haven't been able to find any resolutions. Looking at the fuel pump circuit diagram (Page...
I came across a wiring diagram for the Mazda6 MPS, I'm thinking its got to be similar enough. So I'll start tracing things out with this. I do...
The one for the low-speed fuel pump setting (bolts to the frame under the TMM)? Yeah, that one is working correctly, I've even jumped/bypassed...
New to the forum, figured I' put together a build of my speed6. Or more so the destruction and rebuild of my MS6. I purchased the MS6 in January...
I use to have a bunch of stuff over on MSF, but that got nuked at some point I guess. I'll put together something eventually. I've owned the car...
Hi all, I have an 07 mazdaspeed6. Currently not running (in-tank fuel pump issue) with a built engine/diff/transfer case. I'm using a GT3076r...
Separate names with a comma.