Gen 1 speed 3 Hard accessory mount for phones, accessport, etc.

Made this up yesterday for myself. Any interest?



Fits 04-09 mazda 3 and speed 3.

It's a hard mount bracket to utilize adhesive backed or screw mount phone holders and access port mounts.

There are a lack of good flat areas for adhesive mounts and nobody wants to put holes in the exposed part of the dash board.

This mount would require 2 holes to be made inside the glove compartment area but if the bracket were removed the holes are in a non visible area.

These are powder coated satin black for durability.

$15 would be an estimated price for a kit.

 

I would be interested in one for a gen pu

 

I will try get one made up for a pu and a 6 as well.

 

Just drove somewhere. Don’t think this would work in the pu

 

We received a decent amount of feedback on Facebook.

I made up 10

Buy them here
https://adaptedperformance.com/prod...e-accessport-gen-1-mazdaspeed-3-04-09-mazda-3

Use code "save5" to take 5% off the purchase of all items.

Steve

 

I will still try and look into options for the PU.

 

I have something similar on my STI except it's made to fit in between the radio and the trim so there's no hole drilling required. I'm not sure if it's possible on a Mazda, but if so I'd take one for a 6.

 

I really tried to come up with a no drill solution but unfortunately there was no easy way to do it. Since the holes here are hidden and I would assume this is an accessory that would stay in the car because it is so handy I went for it. Also these cars are 10+ years old. 2 holes hidden in the dash isn't going to hurt the resale value.

For the 6 and the pu I need to get with some locals and see if maybe we can come up with an option. Preferably no holes need to be added.

 

Just ordered thanks for still making stuff for us. Was in the market for a different mount location for ap

 

2 ordered! 1 for me, 1 for raffle!

 

Same!

 

2 minutes to install. Nice piece. Will be making an AP mount for this