Oil return line bolts

Discussion in 'Mazdaspeed 3 Troubleshooting' started by GhostMS3, Sep 17, 2019.

Watchers:
4 users.
  1. GhostMS3

    GhostMS3 Greenie N00B Member

    Joined:
    Mar 4, 2019
    Posts:
    8
    Trophy Points:
    1
    Location:
    Bonney Lake, WA
    Ratings:
    +0 / -1
    Anyone know the part number for the return line bolts? The 2.5 has them listed but not the 2.3l. Will they still work?

    Screenshot_20190917-104755.jpg Screenshot_20190917-105905.jpg
     
    GhostMS3, via a mobile device, Sep 17, 2019
    #1
  2. neganox

    neganox Feline Führer Moderator Platinum Member

    Joined:
    Feb 9, 2016
    Posts:
    1,100
    Trophy Points:
    113
    Location:
    St Johns, FL
    Ratings:
    +2,090 / -5
    Oil outlet tube bolt: 9XF0-02-127L

    Other Names: Lower Bracket Screw, Oil Pipe Screw, Upper Insulator Screw, Oil Outlet Tube Bolt, Connector Tube Screw, Oil Inlet Tube Screw, Oil Outlet Tube Screw, Pulley Screw, Support Bracket Screw, Upper Insulator Bolt, Water Pipe Screw, Screw Flange

    Description: 2.5L turbo, turbocharger & brackets. 2.5L turbo, pipes & lines. 2.5L non turbo. 2.3L, upper. 2016-18. 2018-19. 2.0L. 2019. 2017. With turbocharger.

    .......maybe?
     
    • Like Like x 1
  3. GhostMS3

    GhostMS3 Greenie N00B Member

    Joined:
    Mar 4, 2019
    Posts:
    8
    Trophy Points:
    1
    Location:
    Bonney Lake, WA
    Ratings:
    +0 / -1
    9XF0-02-147L is listed as the lower bolt. I guess I can just order it and see if it works
     
    GhostMS3, via a mobile device, Sep 17, 2019
    #3
  4. Mauro_Penguin

    Mauro_Penguin Punk in Drublic. #BlackLivesMatter Motorhead Platinum Member

    Joined:
    Feb 10, 2016
    Posts:
    1,334
    Trophy Points:
    113
    Location:
    Palm Beach County, FL
    Ratings:
    +1,671 / -2
    The bolts that go on the turbo are ever so slightly shorter than the ones for the block. Which is why they are listed separate.

    I dont have the part number for them but when the bolts that you ordered come in, take them to the hardware store and find some that are the same thread but with the adjusted length.
     
    Mauro_Penguin, via a mobile device, Sep 19, 2019
    #4
    • Like Like x 1
  5. jsmith

    jsmith Silver Member

    Joined:
    Aug 12, 2016
    Posts:
    569
    Trophy Points:
    63
    Location:
    FL
    Ratings:
    +476 / -0
    I'd suggest just replacing with a stud. The bolts have a tendency to strip out since they arent using much of the threading.

    Hole depth is 20mm, and is M6 x 1.0.

    Dont have a drain line handy, but I'd think these would be long enough. https://www.mcmaster.com/93805A326/
     
    • Like Like x 2
  6. Awafrican

    Awafrican Moderator Gold Member

    Joined:
    Feb 11, 2016
    Posts:
    3,586
    Trophy Points:
    113
    Location:
    Canada
    Ratings:
    +2,852 / -11
    Thanks for confirming

    @Binary Assault this is the info I believe you were after in shoutbox
     
    Awafrican, via a mobile device, Dec 12, 2022
    #6
Loading...

Share This Page

Users Viewing Thread (Users: 0, Guests: 0)