Late Night Racing and what we do.

Discussion in 'Late Night Racing' started by Derek@LateNightRacing, Apr 8, 2021.

Watchers:
5 users.
  1. Derek@LateNightRacing

    Derek@LateNightRacing Approved Vendor

    Joined:
    Mar 26, 2021
    Posts:
    3
    Trophy Points:
    3
    Location:
    San Antonio, TX
    Ratings:
    +15 / -0
    Hey everyone! We are Late Night Racing. Some of y’all may have seen us around on Facebook and Instagram and are familiar with our products, for those of you not familiar with us though what we do is this. We love billet parts and love to design and make stuff from billet aluminum. Our first and highly popular product is our Coil Rotation Plate, this is a billet aluminum plate that rotates your coil packs and hides the wire harness underneath. The plate is internally threaded so you can take the coil packs off one at a time and perform any routine maintenance without having to mess with taking the plate off. The plate also lowers your coil packs from stock location by 1mm to get just that much more of a contact with the plugs. This addition to your engine bay completely changes the looks and with our anodized options is the highest quality look you can get.
    https://latenightracing.org/collection/coil-rotation-bracket
    [​IMG]
    Our next billet product we make for both Gen 1 and Gen 2 valve covers but was highly appreciated for the Gen 1 valve covers, is our vented oil cap. The Gen 1 version comes with a baffle that you install and it becomes just like then Gen 2 valve cover where you can have ventilation from that area without slinging all your oil out of the engine, or you can accidentally forget to put your oil cap on and not have an oily mess when you notice your mistake! This cap is threaded for 10an Orb and is versatile in the fact that you can just put a filter on it or you can route it to a catch can setup which is what we really prefer.
    https://latenightracing.org/collection/vented-mazdaspeed-gen-1ms6-oil-cap
    https://latenightracing.org/collection/vented-mazdaspeed-gen-2-oil-cap
    [​IMG]
    [​IMG]
    Additionally we make custom catch cans, coolant reservoirs, windshield wiper reservoirs, intakes, and battery trays. We powder coat, port and polish and shave intake manifolds, and make custom fueling solutions and also can offer wire tucks when purchased with a rotation plate. If you’re a local to us we can fix or upgrade the parts on your car, anything from cavil air filters to stripping the car down and putting all new stuff back in it.
    We’ve been in the Mazdaspeed game since 2011 and have seen a lot and learned a lot with these cars and our local Nator groups.
    If you have any questions feel free to ask us as we are very responsive and love helping the community!
    Here’s a link to our Instagram.
    https://www.instagram.com/latenightracing/
    And to our Facebook page.
    https://www.facebook.com/latenightracing
    [​IMG]
    [​IMG]
    [​IMG]
     

    Attached Files:

    • Like Like x 12
  2. Awafrican

    Awafrican Moderator Gold Member

    Joined:
    Feb 11, 2016
    Posts:
    3,586
    Trophy Points:
    113
    Location:
    Canada
    Ratings:
    +2,850 / -11
    welcome aboard, those oil caps are cool! I didn't even know they were a thing, good to know. Are your intake one piece with integrated air straightener like the HTPs?
     
  3. Jimme T

    Jimme T Greenie Member

    Joined:
    Apr 18, 2020
    Posts:
    185
    Trophy Points:
    43
    Location:
    Ohio
    Ratings:
    +215 / -0
    I guess I should have asked this before but, I ordered the coil relocation bracket and the oil cap for my ms6. Do I need a different harness or is there anything I need to do to the wire harness for the coils to fit?
     
  4. Sho

    Sho Silver Member

    Joined:
    Feb 10, 2016
    Posts:
    1,388
    Trophy Points:
    113
    Location:
    Louisville, KY
    Ratings:
    +2,986 / -0
    You need a tucked coil pack harness for the rotation plate. They sell those as well
     
    Sho, via a mobile device, Apr 28, 2021
    #4
    • Like Like x 4
  5. Derek@LateNightRacing

    Derek@LateNightRacing Approved Vendor

    Joined:
    Mar 26, 2021
    Posts:
    3
    Trophy Points:
    3
    Location:
    San Antonio, TX
    Ratings:
    +15 / -0
    The intakes we make are usually custom to the setup and are usually one piece but we don’t use the air straighteners.

    Yes the rotation plate does require a wire tuck which we do offer as well as a few other companies.
     
    Last edited by a moderator: May 1, 2021
  6. Cold Lotion

    Cold Lotion Mold Ocean Gold Member

    Joined:
    Sep 21, 2019
    Posts:
    52
    Trophy Points:
    18
    Location:
    ATX
    Ratings:
    +85 / -0
    ten years ago this nerd showed up at our nator meat with his pu, and now he's makin parts for us. when i was down on my luck, he swung by and dropped off a coupler, just to be a bro.

    good peeps.
     
    • Like Like x 5
  7. Jimme T

    Jimme T Greenie Member

    Joined:
    Apr 18, 2020
    Posts:
    185
    Trophy Points:
    43
    Location:
    Ohio
    Ratings:
    +215 / -0
    I received my parts today. Thank You. I’ll have to get ahold of you about the wire tuck harness.
     
    • Like Like x 1
Loading...

Share This Page

Users Viewing Thread (Users: 0, Guests: 0)