Thanks for the info. I will have questions in the future.
Yes, all from the fronts. The above pics were after running the long course at Autobahn Country Club. It’s about 4 miles.
For the Mazdaspeed3...
You can buy a CS sway (14-18) on Amazon. Shipping is $38. Makes $30 not look so bad
Thanks dude. Good luck.
Brand part number difference. Rockauto lists the same part numbers for various brands for both the gen1 and gen2.
I’ve been using a Mitty-Vac hand pump for years. Keep the reservoir full. Sucks the old fluid right out.
My guy says the only difference is that the RS manifold doesn’t have the sound symposer port.
That is odd. I’d be surprised if the Moog bushings were filled with anything. They look to small for fluid filled. Never thought to poke a hole...
And make sure you keep the reservoir topped off or you’ll be flushing more than you want to. You’ll see a small hole for the clutch reservoir...
Your video didn’t come up on my phone so I wasn’t able to see the exact concern your dealing with.
There’s something about the Moog LCA’s. I’ve...
what brand control arms?
Oh no. Might want to pull the resistor out and take a look at it. If there’s any water damage or rust on the outside it’s probably toast. Could...
Thanks dude. If you don’t have automatic climate control you should be able to ohm out the resistor. As long as you get 3 staggered readings it’s...
I’d start with new fluid. Be surprised what a bleed will do. Has the clutch been bled before?
Running the wire thru the hood release spot is a clean install. Looking good.
Is the second picture attached to insulation?
I’d follow both lines off the TB to see where they go.
Claybarred my last car about 9 years ago. It sucks. It’s a helluva time commitment.
Sent from my iPad using Tapatalk
Separate names with a comma.