I think you're over thinking this a bit, get one with a small profile fan, try it and if it doesn't fit the. Returns it to Amazon check that...
Here's my latest UOA on Royal purple 1037km 6 months, very short runs like 7km or so in -20c or below rarely get to operating temps also doesn't...
skimmed over the part where you recommended the cobb TIP with stock box, at that point whats the point? stock box is probably the restriction just...
3" intake fits just fine with the stock battery even 3.5" will fit with the stock battery box and the ecu on the fuse box instead of next to...
Totally understandable, email Justin and see what he says, he may reccomend a touch-up tune (partial cost of full tune also all you'd need if you...
I think you have your answer already... I'd that you should get a touch-up tune if you swap on a different down pipe or go from catted to catless...
OP wants to know the best intake, which means it's not a stock sized intake on a cst4 or bnrs3 it's 3" because despite their inlet size they can...
Lol stock sized intake on cst4, if you're going to do that so a bnrs1/2
Looks like a great kit! Way to cold here for me that dailies my car to run one. Perhaps one day it'll be a summer only car, one can dream.
80mm=3.1" for arguments sake they're the same thing so what are you getting on about wondering why you'd want the same sized DP and catback? Why...
While I don't have personal experience with any of them however up here in Canada nextmod seems to have a pretty good rep. Guys I used to roll...
Ah yes that oring/ gromet OP if you have your old slave and master cylinder still check inside it for the grommet/ oring, certainly inspect the...
well reading the shop manual sounds like timing is >10 deg off or one of the following: OCV malfunction • Spool valve in OCV is stuck in advanced...
What's your mileage and when was vvt serviced if it keeps coming back and you've replaced sensor it'd suspect timing is off
Have you tried clearing the code with the access port and seeing if it comes back? Typically there is a history you can see but not with the...
I vaugly recall people talking about a revision to the slave cylinder meaning new ones don't seal with the old hardline property. It's right at...
this is true gotovato has his civic build thread going there that many people still chat in and follow
Depends on what your goals are, I ran a ots+ map from freektune for years with my intake hpfp internals and downpipe works great. Even have one...
"luxury" I find their new interiors incredbly cheap and plastic feeling. We've owned a 1997 BMW 540i (pruchased for 1.2k put 2k into it) and a...
Yup pivot shaft seal part numbers are listed in this thread probably need them from the dealership.... Most of our seals OEM is best anyway....
Separate names with a comma.
