No Yes Potentially You are not wrong in your assumption, however both scenarios translate to different throttle response. You need to figure out...
I guess I can drop in... I have a BNR S4 v3. Been on the car since Dec 2018, about 45k miles now, 90k miles on original OEM engine, tuned by Rob...
IIRC the few guys on MSF that beat this issue, did it by just soldering all the connectors together. Some kind of resistance that caused the...
An improperly bled slave can do all sorts of funny things. You have a twin disc clutch, so you may not necessarily have text book symptoms....
Rebleed the slave before you panic. Most shops suck at bleeding hydraulic systems.
Not to dismiss your efforts by any means, but you really shouldnt have to have such a struggle. One of the surfaces has to be off deck, or...
IIRC the bolts from the engine side, and the turbo flange look similar, but one set is ever so slightly longer. Once upon a time it was common to...
@Raider i just ordered parts to do the same shit on my Pu. Been pissing Ford Jizz for a bit. Tasca said national back order on bearings, but...
Thought about it, amongst other scenarios. But I am done with other people touching the speed and having to deal with a rental. Also done with...
No, but not for lack of desire. After doing the hood vents last year, I ran into some long term durability issues with the foam seals I used....
I did a lot of measuring on the engine bay and how air pressure builds up in our cars. Anything over 40mph and you start building engine bay air...
Supercharging an LS.... Meh....
Your mechanic is a fool, unless he meant when the tie rod boots are sealed. I've replaced the inners in our steering rack twice, and the grease...
It is normal. The ball socket on the inner tie rod has grease packed into it (as does the outer inside the boot). Sometimes you may notice a...
fixed
+1 for the spring perch. The 3 allen bolts thay secure the plate need to aleays stay tight. If you are having issues adjusting the rear, hit the...
Didnt you have questionable oil pressure with this engine from the beginning? It could just be a bad oil pump, or broken pick up tube like you said.
That is the core. Email them, I am sure they have the specs to make the kit, even if they are not listed on their site. You can compare prices...
That is the Full Race intercooler kit for the MS6. That dude was on MSF, his name was Alpha. Unfortunately he is not on MSO. You should still...
Separate names with a comma.
