I take it back. The gen 1 level sensor reporting level is off considerably. Today i clocked a level of 75% and was able to still add close to...
I was in talks with this gentleman a few months back about this. Before i got my hands on a gen 1 level sensor, i was about to send him 3 failed...
I told him to hang off the end of the 1/2 extension bar while i put my weight into it. Oh well, my house, my rules haha
It was definitely a pain the ass to hit that extra 90 degrees. I used a right angle and marked both the crank pulley and bolt with a paint pen....
Build is still running strong at just about 10k miles now. My eco boost crank is not keyed. I do spin the engine slightly above 8k rpm at 604hp....
It never failed. I only pulled it out because the resistance levels were off. That sensor had the greatest success from soldering wires directly...
Unmodified, straight drop in. Yes Modified, the mercury mkz sensor lasted the longest
It's been almost 2 weeks and the gen 1 sensor is still alive and holding up
It looks like it starts with the terminal itself and then blows out the contract pad on the board from what I have seen
Anything for you Enk.
Welcome to the pony show. So far the gen 1 level sender I put in a few days ago is holding up. Problem is they are discontinued from mazda. Only...
I don't even know what those style terminals are called lol
@Rokusek I just dropped the basket back in with his gen 1 sensor. Comparing it with others, it looks to be the same materials used for the...
He's sending me just the level sensor. Hopefully, this puts this issue to bed for good. Crossing my fingers. Oddly enough, it doesn't appear any...
L34B-13-35ZA is what I ordered from tasca. The other 2 look completely different than the photo Enki showed me of his gen 1 basket. So I went with...
Yeah and the level sender itself is discontinued. So gen 1 owners will have a hard time finding a replacement
And I'm dead. Ordered a brand new OEM fuel pump basket for an 09 gen 1. Opened the box and found the fuel level sensor/sender wasn't included....
At this point a modified gen 1 basket is cheaper than going fuel cell to correct a miniscule problem. The journey continues. I'll see if i can...
Do you have an oil pressure gauge? If not, these cars need them. Specifically with a built motor Sent from tapioca
So far so good. A few WOT pulls near 37psi and plenty of varying driving conditions. Crossing my fingers Sent from tapioca
Separate names with a comma.
