Just an FYI: CST5 runs out of steam at 31-32psi with a peak rpm of 7500rpm. This makes 530whp with some taper down above 6500-7000rpm depending...
Safety First! Following the NHRA requirements, I have been building a firewall enclosure for the Radium FCST System in the back of the car....
10 gallon
The rocker arm crossmember got some added bracing welded in over the weekend. I think its a bit overbuilt, but I'm ok erroring on the overbuilt...
One more post because this is a fun one! [ATTACH] [ATTACH] With the staging brake location I cannot easily use the OEM center console and thus no...
I also worked on alot of electrical and fuel plumbing recently: Electrical: So I moved the battery location to passenger side in front of the...
More updates and lots has happened: Did a bunch of welding (these are not final but are the images I seem to have). By no means am i a...
More updates from lastnight: A buddy and I prepped the trailing arms for the pushrod mounts last night and got them tacked in place. [ATTACH]...
Spring will be on the damper itself. Makes the preload adjustments much simpler along with other things. The pushrod uses LH/RH spherical rod...
The subframe did not actually support the weight. the top of the spring rests against the "chassis rail" and the subframe is just sandwiched...
A question to the Forum Engineers: Additional bracing for the crossmember - I am planning to add bracing along the blue lines in the image. This...
Next update from the weekend: The rocker arm suspension is no longer jsut a cool idea and CAD model! Firstly, I had to remove the brackets that...
A couple updates over the weekend: Finished up some assembly of the Radium FCST (Fuel Cell Surge Tank) system. Added the second fuel pick up in...
What a great Monday! Some goodies arrived today (both expected and not expected). Little box is an AWD controller that integrates with the ECU...
Nice build! Let me know you want to talk wheels and tires...I've tried some things
How hot does it get? Need gloves after the engine has been running?
From what I can tell: the driver side case half of the transmission is the same for MS3 and MS6. Therefore the TMM and shift cables bracket...
Things are starting to happen! It actually has a transmission now! [ATTACH] [ATTACH] Trans and T-case went in pretty smooth. Intermediate...
UPDATE! The front mount for the CX7 arrived and look fantastic! Everything fits perfect (not tested on car yet) but I forgot to order the...
Ya thats my same logic. Touching on the power capacity of the rear diff system...I have more hope. Newer cars with this front biased AWD...
Separate names with a comma.
