Yeah, I know they you all are trying to help me, and I am grateful, I promise, but they are almost attacking me, you just have to read the...
I told you in #32 since I installed new secondary O2 sensor, LTFT stopped going big negative. Since that day, I drove the car 5 or 6 days more, I...
Yeah, I know desired is not an important parameter, but if my desired AFR idling is 14.1, then my AFR idling is 14.1, so it means something I...
Thanks for answering. When I had the LTFT in -20/-25%, car has some hesitation/jerks/pulls in low rpms, now LTFT is under -6% and car feels normal...
Your ideas: 1- Check MAF connector/wirings >>>>> Done 2- Unplug Secondary O2 Sensor >>>>> Next Saturday I'll Can you understand I can only work...
I was using a custom map when car started failing, but now I am running stock intake, stock testpipe, stock exhaust, only modified is downpipe is...
I am not having LTFT problems since 2 weeks. Problems are different deppending of the car wants, thats why I said in the tittle "My car is just...
If you just read the first post, you will know what's the problem and all the updates or changes that have happened in my car since I discovered...
Yeah I know. I will repeat my last question to see what people thinks. A few months before discovering this problem, I rebuilt myself the K04...
Yeah I know some people changes to 5w40, and Mazda USA said the problem is the crankcase ventilation and they replaced valve covers and inlet...
I rebuilt because that.
By the way, a few months before discovering this problem, I rebuilt myself the K04 with a good brand CHRA (Melett), but checking last WOT logs, I...
Okay, I will do it and I will test it xD
It's a Denso one, I'll try. Unplug it and let it unplug? and what should change? AFR in WOT should be good again? :s
I am not running my custom map, I am running an OTS Versatuner map (it says its stock map but with a bit more boost until redline, so MAF CAL is...
I know, you're right, I'm obsessed, but when my car was running fine, all the values/parameters were fine, that's why I compare it so much, and...
Yesterday first I did is closing a bit the pins of the MAF wirings, so they grab better and make better contact to the MAF pins. I upload 4 idle...
Stock MAP sensor. I just want to install stock map like 30 minutes and very very soft use (lower than 2,5k rpm and lower than 25% accel pedal) to...
I already ran catless dp with the stock map and fuel cuts prevents overboost, by the way, i would use the car 99,9% very soft use, not boosting...
@Enki but what happens with catless downpipe and stock map? I think the only problem is the CEL and the possible fuel cuts when going WOT on 4rd,...
Separate names with a comma.