Due to some calls outs and shit talking on facebook, I'm posting this poll to gauge availabilities and interest in doing a competition in drag and...
Solid subframe bushings for the 6. The fabrication of the solid bushings are probably the easiest part of the job, the hardest part is removing...
Ported K04-882 (Mazdaspeed) Turbine Housing -Heavily ported turbine entry housing & wastegate. No porting past the first bend of the housing....
Compressor wheel comes off with housing- *** REVERSE THREADED NUT*** [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG]
Rear Spring Adjusters [IMG] [IMG] two of these: http://www.speedwaymotors.com/Speedway-Adjustable-Hidden-Spring-Shim,3389.html There isn't a...
Custom Endlinks Fronts: [IMG] Two right threaded and left threaded, ½-20, Teflon lined, aluminum rod ends :...
Most of the suspension/alignment measurement that people talk about relates to the angle of the wheel and how relates to the centerline of the...
As part of preparing racecar for the first race, I quickly had to fabricate some spring seats for 2.5" eibach springs. Originally, @xfeejayx; and...
Fiberglass Intake- V0 – the learning experience. A while ago, I 3d printed a mold of squashed intake, dissolved the plastic with a solvent mix...
[IMG] Above is the exhaust that @xfeejayx and I created. The concept is simple: stock exhaust section with hangers cut and u-bolted to a 2.5" x...
@xfeejayx and I toasted an alternator regulator at an AX when the 6 positive terminal did what 6 positive terminals do- it came loose, then fell...
In an effort for searching for extra caster for the six, I stumbled across a TSB by mazda about cross-caster from subframe misalignment. In the...
So.... @xfeejayx and I bought a 6 in February to build as a no holds barred autocross racecar. Much of this is heavily influenced by @phate and...
For some reason, I've lost the ability to edit posts? Googling, it looks like it might be Xenforo bug of some kind. HALP! For instance, I...
Will there be a 'Gearhead' equivalent? Just curious if this is in the works or has been decided against...
Separate names with a comma.
