Back at it tuning the speed again. Lost our daily SUV to a deer so the Speed had to come back into daily use. Chasing a stumble/cutout that I...
Not a whole lot going on lately, parked the Speed for a while until I finish up a couple projects to create room to work on the front end. Helps...
Haven't had much going on lately. Tune is leveling out, I believe I have maxed the K04 for now as I hit 19.x to just over 20 PSI depending on air...
and stuck again.... I think I have not been able to find the map limits or how to rescale some maps to shift the resolution. I.e. The relative...
Agreed, luckily i have not seen very much knock logged, even with IATs in the 150* range and WOT fuel backed out to 10ish under knock rather than...
Something more like this for timing? Seems a bit smoother and reigned in on the higher load areas [ATTACH]
I'm not surprised, there are a number of tables that looked odd when I got into the ECU. I have a suspicion someone else has been in the tune...
Yeah, I wasnt 100% sure what boost comp was, but once leveled out to 1, it stopped nerfing my boost target values on gears 3-6. Here's my open...
Eureka! Well, kinda. Ended up adjusting the boost compensation tables for 3,4 and 5-6 to 1 (vs having values as low as .8 in the main boost...
I am stumped. I have been trying to find which load/limit table is catching me out. I have adjusted a number of load tables mainly to the 2.10 to...
The pros and cons of a pull a part type junkyard being 7.5 miles from my house... Occasionally good things pop up for cheap Thats what I thought....
@JohnnyTightlips - Thanks! That really helps with the thought process for the ECU. I did find a "Desired Boost Load" table, rather than a straight...
Fair enough and makes sense. What I am trying to do is be able to correlate what tables (whether boost or load based) are the ones that I need to...
That's the odd thing, current load by gear tables are significantly below the desired boost table and logged pressure. I.e. in 4th, i see peak...
So I did find that there were three additional tables that are the ones mainly affecting AFR on full throttle. They were specific single row...
Had a good day at the local junkyard this weekend. 25% off and t here was a seemingly unmolested CX-7 in the yard. Made off with the nearly entire...
Thanks, I'll update the overload and unknown tables to match the base and see what I log on the drive home today.
Ok, made some updates on the ECU. One was targeting 11.3 under high load in the "Open Loop Fuel (Base)" map and in the "Closed Loop Fuel A" table....
Yep, Tactrix 2.0 OpenPort cable. Can be used with Mazdaedit, VT, and a few other softwares like the free subaru/Mitsu ECUedit, Forscan and the...
Ok, lets see if I understand the following... I logged the drive home and was playing with loading the engine up to see where I ended up for the...
Separate names with a comma.