Those pucks are usually used to prevent bumpstop bind when the suspension compresses. If Bilstein didn't include them, don't worry about it.
Could be different spring rates than your previous springs. Your springs may settle a little after a few miles of driving. You may have also...
Interested in what you did to the Cummins.
Love the trap door design!!!
They could have run it without oil for a long time, and just worn down the bearing. I would be surprised if you don't find any pieces inside the...
+1 for morimoto. Swapped out stock halogens for them years ago, and literally night and day difference. The beam is so much brighter and...
Either 10mm or 5mm. But if doing 10mm or more you WILL need extended wheel studs. I've got 5mm spacers and extended studs, but I am a gen2....
255 ends up being right on the edge of thr rim. Regarding wide tires making your turning sloppy, you have to get like a 275 tire which pokes out...
255 will give you 10mm more tread, over the 245. Might as well get as much as you can. 40 vs 45, the 45 will give you just a couple of mm's of...
Old notes are old... [ATTACH] It took me forever to get the temp right, turns out the enclosed instructions for tuning the pots were wrong for...
My 2nd hand unit worked fine. Tuning it was tricky as the SP63 instructions were backwards. I took mine off though for reasons, desperately need...
Love it
You can get Michelin AS4's in that size. Bought some a couple of weeks ago. Also... +1 for Bilstein coilovers
I already have a check valve in line with the OEM PCV valve. Do you have a part number for this pump? I'll look into it. I'd be interested if...
Had a chance to work on the speed yesterday. Got the oil changed, slapped my ETS TMIC back on (I had been rolling with the OEM since the...
Miss you too bro! Big time!
Today I was going through my mess of a garage. I have been trying to reorganize it to make it easier to work in. I found so much stuff!!!!...
That's how it was for me. I called for months to no avail. No Dr's were taking new patients, or they wouldn't get back to me. It wasn't until I...
Shit..... I miss this place. Been out of sorts for a while. The Pu needs restoration work. Having a mental health breakdown and then trying to...
IIRC someone tried an epoxy to install them and had success. I just can't remember who it was. Maybe @JohnnyTightlips ?
Separate names with a comma.