Motor is not built, has 105 000 miles on. Unfortunately there is no oil analysis available here. Climate here is warm with summer temps regularly...
Replaced Engine oil at 3100 mile interval with Motul 10w 60 as recommended by my Turbo installer as well as the Agents who sell them, also...
I believe that would be your boost source, my new turbo did not have the nipple on the compressor housing so we drilled a small hole for it on the...
Finally installed a SWAS Delete Switch, wired the switch on the dark blue wire. Could probably have used any of the wires. Works great[ATTACH] ,...
[ATTACH] Well this little turbo ( Pulsar PSR2860 Gen2 Dual Ball Bearing Turbocharger) is surprising me so far with it's smooth and gutsy...
Sorry EB , it was a while ago.. if memory serves me well the bolt only helped a little. Once the idle speed was raised you could not see any...
I think the the Banjo bolt helped restrict some oil flow to the turbo, thereby allowing less to get through the turbo seals.
Banjo Bolt is cheap fix. Installed one as soon as turbo started smoking at idlle.. also raised idle rpm a bit. This bandaid lasted a good 70 000...
Bump
All parts are busy being installed , excluding the 3 Bar Map as it has not arrived yet. (tuner is aware) After scouring the net I had returned...
Good dose of insightful info.
Last night placed my order for new Turbosmart BPV Full Recirc.
Thanks for the heads up guys, salesman took some time to find them on their system as they were apparently not listed along with their regular...
Nice ride, have fun modding.
Sooo, the day has finally come to part ways with the stock KO4 turbo. Went for a spirited drive Saturday 22 April 2023 and all went well. Come...
Serviced the Xcell VTA BOV today... while I was in there took a look at the inter cooler piping, and found the both the inlet and outlet pipes to...
Thanks for the clarification, they look good.
Raider , are those Raiden by Lenso ET35 18 x 8 wheels on Christine?
Installed DM SS plate with the Corksport shift weight and solid shifter bushings. Shifts are short and crisp now.
You can add rear and side motor mounts to that list...my 2c
Separate names with a comma.