are those acceptable numbers for the throttle position then? should i be worried or no
Hey it's me, back again. I fixed my issue by buying an oem maf sensor. Car is pulling VERY well and feels fine. Im currently on the versantune 93...
Anybody have experience with the ebay turbo inlet. Wondering if it's any good.
It turned out to be the piece of shit denso maf sensor. Borrowed my friends and felt real power and torque steer for the first time. Thank you all.
I've made a discovery. This car has a non oem denso maf sensor in it. Could this be the root of all my issues. I've heard aftermarket maf is a big...
Heres a better log. I do see the load numbers climbing pretty high. What could this indicate. Is this why wgdc is being pulled.
So after looking at the logs, the ecu begins to pull wgdc at about 1.3-1.4 load. Later in the pull when the load reaches 2 the wgdc is already at...
I discovered something this morning. The lines going to the stock bcs appeared to be reversed base off a diagram i viewed. I placed them in the...
Bought it used, theres a ko4 down there im 1000% sure. The flow numbers might have to do with a 3 inch intake
whats an sst
its not, its suppsoed to be hitting around 17-18psi
The car is hitting 9s at wot and the wgdc is the issue im trying to figure out. Its staying at 0% and not building past 14 psi. With a downpipe...
here it is
Have been trying to hunt down this issue for a very long time. Car is not hitting boost targets and running very rich at wot. Tuned via versatune...
[MEDIA] found a sweet spot
[IMG] Got me some new wheels, removed that door molding right after this picture was taken.
Do you have to command the burbles at all or just completely let off. Im running cobb high flow downpipe to a unknown brand catback with one res...
Just threw this tune on my car sounds great, curious if this will damage the cat/cats over time? i have a cobb downpipe with high flow cat
Separate names with a comma.