Ok Gents time for an update. I've been making decent progress and the car is on the road just needing an inspection. It had failed because of the...
Just wanted to update you fine gents. I was able to swap out just the motor/blades/controller from a SPECTRA PREMIUM CF21003 from RockAuto. took...
Have you read through this thread?? https://www.mazdaspeeds.org/index.php?threads/fuel-pressure-drops-then-stalls.5606/page-3
beats me, unless you put in another bad ITFP. I'd start looking from your tank. to your HPFP. Only thing I would think that would start dying the...
16psi with the car just sitting there?
The little black box that sits on top of the manifold, or the vacuum controlled plunger that sits on the right of the manifold? I have the...
yes, i set the scalars for the MAP in ATR. not sure if that's a one and done type thing, or just to get you off the ground. i do plan on getting a...
P2009 - I believe it's because of VCTS delete and all i need to do is uncheck in ATR? P0098 - i need to double check that the CS 3.5 BAR MAP is...
Finally got some plates. Took it for a spin and seems I blew a power steering line. Also have a few DTCs I need to get to solving. [ATTACH]...
Using the AP, I monitored coolant temp get up to 225 with the fan not turning on at all. That's the main symptom. I'm reviving this car from...
Regarding the clunks, my money is on sway bar bushings. they're a bitch because they're mounted on the top side of the sway bar/sub-frame. .
Anyone know of radiator fans that will work with the Mazdaspeed 3s? looks like regular mazda fans are $100, and MS3 one is about $450. I...
is there a link to this o-ring kit, or did you just order a bunch off McMaster Carr or something?
i had an old spare from a friend. looks to have cleared it up. pressure now rises after the car is shut off.
ok, need someone to doublecheck to make sure i'm not crazy. if i run the car up to temp and then shut it off, the fuel pressure relief valve...
also, i did confirm that the alternator was the culprit to my starting issues. apparently there's something in the pulley that allows it to turn...
alternator replacement process: Prep step. I've started using this new penetrating oil, and I have yet to break a bolt off since I've started...
So a slight update. Alternator came out in about an hour. Still waiting for the replacement should be in-hand tomorrow. I took photos of how it...
No argument there! Will let you know how many F bombs are dropped.
Any issue ordering the Tribodyn 75W-90 LS for limited slips? This would be for a 2008 MS3 GT. Amazon
Separate names with a comma.
