Here’s an update. The honey comb fixed weird fuel trims and cruising afr. However it did not fix my lean at wot issue. Car still has 0 kr but it...
So has anyone had afr issues at wot because of this like I’m having?
Holy shit with the ac on maf volt and afr are both rapidly moving up and down
Based on what I sent you does that look like my issue?
Here is the log there was no wind ac is off and hood is down. Here’s the pics also. I ordered that straightener can I put it right in front of the...
Yes both are oem. Honestly the air straightener makes a lot of sense. I have a corksport 3.5 intake. I’ll send the pictures and logs when I get home
https://mazdaspeeds.org/index.php?threads/lean-afr-during-wot.15272/
What tuner do you guys recommend. And idk how to figure out the afr issue. Iv boost tested from the air filter back and there is no leak the issue...
I just figure the power can be made easier and with less boost with a bigger exhaust
well the turbo isn’t out of steam yet. this is a stock motor so this is where he was comfortable tuning too. I have a 3.5 inch intake and 3 inch...
Dramatuned.
my tuner says I should be making 480ish 28 psi on e30. There’s not an awd dyno near me
Maxed out on the cst5. only way to make more power per my tuner is a 3.5inch exhaust system. But literally no one makes one
Any Update on the 3.5 for the speed6 really needing one lol
I ordered it with the holes pre drilled after I contacted them they said if I wasn’t happy with the fitment I could use a 17/64 to make it...
Fixed it! The corksport fuel injector holes were a hair too small. When installed the injector tips were being squeezed causing them all to leak...
Got a log of my issue. You can see how long I’m cranking by looking at rpm. To me it looks like a fuel pressure issue. Can anyone confirm?
No should I start one? I just saw this guys post and it’s exactly what’s happening to me. Wish I knew if he fixed it and how
Mine are disconnected and issue is still there. I just pressure tested my injectors with 80psi and it isn’t leaking air.
Same problem with corksport rail and manifold. Anyone fix this?
Separate names with a comma.