Any update on how the Massive endlinks treated ya? I'm in the market for new ones and have heard everything from OEM is the best to run Moogs....
Just a random question I had after checking out a friend's Speed3 with a slightly different setup than mine regarding the vacuum lines for the...
Update for this as the Summit Racing link is outdated and still left me confused ultimately. TL: DR; TriboDyn Tri Ex 2 for transmissions, Tri Ex...
It wasn't loose so I think it finally leaked through the sensor. New one has been great so far!
Those aren't the cup design ones where they account for the shielded part of the seal. I got the seal on with an oil filter wrench, however with...
I am going through this now and have wasted days and tons of money on things in hopes to get this installed. Plastic hammer and wood is tearing...
A strange issue, to say the least! Do you have any recollection of what was wrong with the previous housings you read on?
Big update, with some good troubleshooting and good news. TL;DR: Something about the HPFP housing I had was giving me the issue. Troubleshooting...
Let's revive this again as this is indeed a recurring problem! I am back to ~60psi ITFP drops randomly, enough so the car cannot be driven even...
When you say "side pieces", are you referring to the wheel fender liners or the side shields? Only because I bought these recently, here are the...
Wanted to update this post on what I will end up doing in the future when time permits. Damond Motorsports ironically enough sells a spin-on...
Yeah CorkSport is my go to for how thourough they are. Damond is right there next to them. Unfortunately I have never had a positive experience...
Here to add in my 2 cents and share my review of this oil cooler. I do not recommend this product. I would suggest going Damond instead if you...
Hey everyone. After weeks of waiting for JBR support to help and eventually falling flat, I am finally ready to post my incomplete review of the...
At this point that fuel pump comes out and gets cleaned every few months lol. I can certainly clean it again, been running E30 all this year.
I will try this test again, although from all the testing I've done I haven't seen it drop 800psi in a tenth of a second. Never hurts to test...
Update to this, the top sensor is the back-up switch, and the bottom one is the neutral safety switch. I have replaced the back-up switch and...
Encountered a single cell within a datalog that made me wonder if I'm experiencing a fuel pressure issue or simply seeing signs of a sensor on its...
I've found a leak from the transmission sensors, but I'm unsure if it's one or both of the sensors leaking. I'm also curious how these leak and if...
BNR S3v4
Separate names with a comma.