I would agree with big dill, there is a lot of compensation from the ECU but its out of the normal zone ( SHFT & LTFT = + 10 or -10 is acceptable)...
Alright.... so I've been self tuning my new setup (BNR S4, Catless DP, 3.5" INTAKE, 3 PORT EBCS, Denso ITV22 Plugs, and 3.5 bar MAP) and I wanted...
IMHO it seems to be a fueling type of problem... Your LTFT are wack in the datalog 15, maybe try to get a log just driving around and see if you...
I checked everything vaccum and boost pipes related except the purge solenoid... I can give it a shot
I bought the Bnr used, but all my gaskets and hardware was new. I put a 3.5 bar map in, 3.5 intake, 3 port ebcs, and 3”catless downpipe on when I...
Yes I've done a MAF cal and IMO I think it looks fine. I attached it below.
Hello ya'll. I'm new to this forum but I figured this might be a good place to start with troubleshooting my issue. I just put a BNR S4 and all...
Separate names with a comma.