Just an update. Almost have the wagon situated. Blew up 6.0 powerstroke, full-time college and a full time job have been keeping my free time...
Just an update on narrowing down ecu choices. Haltech 550 or 950 was the original thought. I found out that both of those ecu’s don’t support DBW....
I user by the name of Troubled81 has a thread similar to this but has gone silent. I’m not going the same path so I figure I’d post what I’m...
Looking to do the same thing but with a megasquirt 3 pro. Any updates?
Instead of bringing an old thread No name brand Ebay and Amazon parts Back from the dead, I’m posting a new one. In that post a user provides a...
Just to update the thread. Problem is still unresolved. I drove my MS6 to college and got very proficient at tuning on these cars. MS6 is an...
I fixed this problem by tuning for the intake and replacing the MAF sensor. The intake is much larger than stock and the ecu wasn't happy with it.
That’s what i was betting on too. I was just hoping it was something I messed with in the tune. I haven’t messed with the cold idle. The...
I’ve recently got ahold of access-tuner and have been tinkering around with a tune for quite some time. I’ve noticed that it takes my MS6 about 25...
Just an FYI for y’all. Be careful not to do the window reset to often. I’ve had to do it because every time I flash a tune it messes with the...
I live in the country and haven’t had to take the keys out of anything but I’ll start trying to do that. I pulled the batter cable and reset...
I just purchased and went through the entire Cobb tuning course. I learned that the ecu logic doesn’t learn octane. it’s a strictly “reactive”...
Recently purchased a 2007 MS6. Had some issues but I’ve fixed just about everything. The key fob wouldn’t lock or unlock when I bought it. I...
I drove to Lawton (the closest largest city). I went to Walmart, sams, 3 different comer stations and love’s on the interstate back home....
I tested my findings by going to another gas station an hour away. I bought 90 dollars worth of 91 “ethanol free”. These pumps clearly said no...
I’ve got another lead on the issue. Now to explain the situation. I just bought a very nice MS6. I pulled into a hutches and put some 91 in it...
Fixed the issue. I pulled the intake off my ms3 and put it on the MS6. It runs perfect. My Cobb should be here today. Thank y’all for the help....
I just tested the in tank fuel pressure, with it running and Revving I saw above 60psi the entire time. so I believe there isn’t an issue with...
Well I just rebuilt the pump after I got off work today. It had factory internals in it and it did have some metal shavings but nothing looked...
Okay new intake will be on the way. I pulled the spill valve for fun. It’s rather dirty and there’s metal shavings in the spill valve area. The...
Separate names with a comma.