I opened mine up, nothing looked off. Gonna try using a power probe to diagnose the systems running off that to see if anything is broken.
[ATTACH] So I went through and tried disconnecting all the fuses from the PJB, no luck. I then traced out this aftermarket remote start system...
I forgot to update y’all but I noticed some loose wiring when I reinstalled my PJB the other day. Previous owner seems to have failed basic...
I got the metal membership (I needed to renew it anyways so good timing) and looked into the PJB. On my 2009, when I unplug the PJB the draw goes...
Does anyone have or know where to find electrical diagrams showing what circuits run off the fuses? If I had one of those I could at least have...
Year/Make/Model: 2009 Mazdaspeed3 Mileage: 166,450 Location: Arroyo Grande, California Concern: battery started draining within a few days out of...
I pulled mine apart recently and was able to JB weld it back to a functional state. A nice fix for the time being.
Yes, I have. It reads 0 all the time, regardless. I have tried manually bypassing the EBCS and directly connecting the hose to the wastegate pot...
Ever since I got this turbo (BNRS4) from a buddy and installed it, I've been getting boost creep all the way to 22 psi on spring pressure. The...
Turns out my issue was with an ignition coil. I had just replaced the oem ones (causing spark blowout) with brand new densos from rock auto. One...
I am having a similar gremlin appearing at wot, and was planning to test this relief valve on my AP. How much drop in pressure after shutting off...
I cannot confirm nor deny this working for your application unfortunately. To the best of my knowledge, the gen 2 logic is different as Awafrican...
I took the turbo in to my Tuner, he said it looks fine. The play is normal. He said there may have been a crap filter on there that let some stuff...
I emailed BNR, and he said “I machined the housings from v3-4 back when I ran out of inventory.. You’re good.” Something feels off with this. I...
Hey all. I recently picked up this bnr s4 unit online from a guy. Upon arrival, I noticed that there were scratches in the intake side around the...
Hello all, I am looking for opinions or facts on which oil catch can setup is best for running a BNR S4 or similar sized aftermarket turbo. I’ll...
Bnr S4 has more room if I build my engine some day. Worth it in my opinion. Plus, it spools a little later than the cst4 which means a little less...
BNR S4 and ETS top mount intercooler it is. Plus, it’s easier to mess with fab wise. On another note since the BNR S4 is 3.5” intake if you know...
I am looking at a larger turbo for my stock internals. I’m not looking to build my engine right now either. I too will be staying TMIC, along with...
Reporting back a few months later. My CEL is still gone, hasn’t appeared once. Unless there’s some software glitch with the ecu, this is working...
Separate names with a comma.