Hey folks, I guess I'll start this thread and see where it goes. I bought a 2012 MS3 brand new back in 2012. A few weeks later I took it up to a...
I recently acquired a built MS6 with PI. The split second controller will not connect to the ECU. I have tried 2 different USB to Serial cables...
The OEM fuel system with e30 is good to about 370whp or so before you start to see some wild IDC "injector duty cycle" To fix this people will run...
After playing the mixing game for too long I decided I would like to try out a fuel cell and just run straight corn in it. I looked at a lot of...
The stock mazda fuel wire appears to be 14-12awg it might be less but it is hard to tell. I was having some strange lean issues and this seemed to...
I finished my port injection setup and I have noticed a strange issue. I thought I was alone in this but it appears that @andale927 and @Bigelow...
The Split Second Controller is use to control additional Port Injection injectors. It uses MAF voltage and RPM to know how much to spray when. The...
I thought I would share my port injection setup for all who are interested. It's not the prettiest, or the most amazing thing in the world, but it...
Separate names with a comma.