Hello guys, I need your help, my 2007 MS6 have p0012, the PCM is not sending ground signal to the OCV, if I manually add ground to the valve the...
I have question about the Vvt. I am replacing the timing chain and noticed that I have movement in the Vvt. Is this normal? Thanks for your help!!!
2006 Mazdaspeed 6, 78,000 miles VVT has never been done, but I thought the high pitch squeaking I've been hearing at cold startup was the timing...
I’m looking for some advice… I’ve got a 2008 MS3 with relatively low mileage for its age (86,000). I’m the original owner, I’ve taken good care...
I'm part way through replacing my timing chain and vvt, I just torqued the cams and afterwards was able to fit the locking plate back in with some...
Alright so I know there’s a few threads on here about this but I haven’t seen anybody with my direct circumstance. Long post incoming…...
New to this board so bare with me. I have a 2008 MS3 that I have owned since new. Not many mods except suspension and some mounts. Car has...
Installing Timing Components Pro Tips Pretty much every bolt tq sequence is a criss cross or start in the middle and circle out. When in doubt...
Separate names with a comma.