Fuel Return Line Alternatives

Hello, I recently noticed my car leaking fuel from my fuel supply line. I checked it out and it is missing that clear retainer clip that goes above the blue one. Does any one know any fix for this instead of purchasing an entire new line? I've also read online that people have gotten by without the clip, so it seems like that I am just not so lucky. Any help is appreciated.

 

Maybe something like this?
https://www.oreillyauto.com/detail/...its-18920/fuel-line-repair-kit/800063/4257334

The retaining clips are a different style but should still work. Maybe stop by your local automotive shop and see if they just sell the connector and then try to just use the clear piece that you need.


Sent from my iPhone using Tapatalk Pro

 

I've seen someone just wrapping zip tie over the plastic elbow to the HPFP nipple and it's worked well for them.

 

https://www.ebay.com/itm/162378516818


Sent from my iPhone using Tapatalk Pro

 

Thanks! I appreciate it.

 

Can you send me a newer link of it, it keeps saying error 101 thanks

 

Talk to @Pat@DirtyWaterRacing he makes hoses to solve this issue best way to get ahold of him may be Facebook look for dirty water racing.

 

You can run a compression fitting to 6an on the firewall supply side to the HPFP receive side. And then you can just run a 6an line. These work great and I have been running it like this for 2 years. AN fittings do not need to be hulk tight if you do that you will wreck them. Get them snug and then just a little more.

Both lines use the same fitting.
Firewall Feed - Vibrant Performance 16455 - Vibrant Performance AN to Tube Adapter Fittings
HPFP Receive - Vibrant Performance 16455 - Vibrant Performance AN to Tube Adapter Fittings

You can then buy a pre-made 6an line or make your own. I am not sure what size you angles you will need. I would think a 90 on each end and 18 inches maybe but you would have to do some measurements.
http://www.radiumauto.com/PTFE-Hose-Assemblies-P267.aspx