Gots me all da CorkSport Goods...

Discussion in 'Corksport' started by Speedie6, Jul 3, 2021.

Watchers:
2 users.
  1. Speedie6

    Speedie6 Silver Member

    Joined:
    Jun 7, 2020
    Posts:
    276
    Trophy Points:
    43
    Location:
    Houston, TX
    Ratings:
    +173 / -1
    Okay, a bit of exaggeration. I know there are probably people out there with even more CorkSport products than me. But I got a fair amount. So, I figured I would post some pictures. Here is what I have from CorkSport.

    * Strut Tower Brace. (I don't think they make this anymore for the MS6)
    * Big Brake Kit Stage 2
    * 4" intake
    * Front and rear camber arm sets
    * Skid tray (I actually needed to replace its oil filter cover with a simple flat plate. No biggie but I don't even understand why the one it comes with isn't flat.)
    * Engine Cover
    * Throttle body
    * Radio antenna
    * High pressure fuel line
    * Intake manifold gasket. (Not yet installed)
    * License plate relocate
    * Leather shift knob

    Here are some pictures. You can't really see the throttle body, just the CS hose going to it. The high pressure fuel rail is also hard to see, but there are a couple of pictures. You can see the skid tray with my own oil filter cover.

    So, CS has a few bucks of mine. No sponsorship or anything. I'm just showing off what I blew some cash on...

    Antenna.jpeg BigBrakeKitStage2.jpeg CorkSportIntake.png EngineCover.jpeg HighPressureFuelLine.jpeg HighPressureFuelLine2.jpeg SkidTray1.png StrutTowerBrace.jpeg ThrottleBody1.jpeg
     
    Last edited: May 21, 2022
    • Like Like x 3
  2. Speedie6

    Speedie6 Silver Member

    Joined:
    Jun 7, 2020
    Posts:
    276
    Trophy Points:
    43
    Location:
    Houston, TX
    Ratings:
    +173 / -1
    Didn't even get a thanks from CS for the plug... Oh well. Anyway, I have received the control arms and the intake manifold gasket. So, here is a quick pick of the CS stuff I have but not yet installed. Note that I have a V1 of the JMF manifold modified to have fuel rail. Essentially it is like a V2 but not. I think the V2 has built in o-rings and doesn't need a gasket, not sure. But since I have a V1, I need a gasket. At the moment, I have a Teflon gasket from another vendor. Next time I'm futzing with the manifold, I'll put on the CS.


    upload_2021-7-23_4-29-38.png
     
    • Like Like x 1
  3. CorkSport - Derrick

    CorkSport - Derrick Approved Vendor

    Joined:
    Feb 10, 2016
    Posts:
    644
    Trophy Points:
    93
    Location:
    Vancouver, WA
    Ratings:
    +921 / -0
    Hmm, you need to find one of the OG front and rear braces too...
     
    • Like Like x 2
  4. Speedie6

    Speedie6 Silver Member

    Joined:
    Jun 7, 2020
    Posts:
    276
    Trophy Points:
    43
    Location:
    Houston, TX
    Ratings:
    +173 / -1
    Not sure what exactly those were. Were they like the AutoExe member brace kit? I don't remember seeing that particular CS product.

    I figured if anything, you would say I need your exhaust or turbo or manifolds or FMIC. I didn't happen to get yours for these, but, I'm good with what I've got there.

    The braces you speak of, well, if they show up on my door I'll check them out...
     
  5. Speedie6

    Speedie6 Silver Member

    Joined:
    Jun 7, 2020
    Posts:
    276
    Trophy Points:
    43
    Location:
    Houston, TX
    Ratings:
    +173 / -1
    Added a couple of more small CorkSport doo-dads, using up reward points. I got the license plate relocate and the leather shift knob. Actually haven't received them yet. I've updated my signature with my current build.
     
Loading...

Share This Page

Users Viewing Thread (Users: 0, Guests: 0)