How To: Repair Vibrating Driver Side Mirror

On stock motor mounts I had an issue with my driver side mirror vibrating. Once I upgraded to DM PMM and CPE stg2 RMM it became so bad I could not use it. My other mirrors would vibrate but hardly at all. I popped the lenses out "it is held in place by 3 round knob thingies" and used white grease to grease all the joints but that did not fix it. I then popped the back off and found the root cause. The plastic bracket had snapped and was letting the mirror flop around.

Step 1 - Pop off back of the mirror, the best way I found is to pull out and up from the bottom. See picture for tabs. I broke one and JB Welded it back too.





Step 2 - See if your shit is broken , mine was.



Step 3 - Smother in JB Weld.



Step 4 - Drink beer for 12 hours or go to bed.

Step 5 - Pop it all back together and relax.

ps. this could also be an issue on the passenger side "of my best friends ride, tryin to holla at me"

 

This is good info as my passanger side rattles bad at higher rooms. Will have to look into mine soon.

 

Thanks for this!

 

why are you driving your car in a high rise?

 

lulz