p0850 code 2012 ms3

Discussion in 'Mazdaspeed 3 Troubleshooting' started by silas, Feb 22, 2020.

Watchers:
3 users.
  1. silas

    silas Greenie N00B Member

    Joined:
    Feb 22, 2020
    Posts:
    2
    Trophy Points:
    1
    Location:
    wisconsin
    Ratings:
    +0 / -0
    just got this code says park/neutral switch input circuit and a pcm code. only mods i have is the cobb AP and corksport intake. Where should i start?
     
  2. Ssinstaller

    Ssinstaller Greenie Member

    Joined:
    Mar 16, 2017
    Posts:
    129
    Trophy Points:
    28
    Location:
    Nc
    Ratings:
    +88 / -0
    At the neutral position switch in the transmission.
     
    Ssinstaller, via a mobile device, Feb 22, 2020
    #2
    • Like Like x 1
  3. Awafrican

    Awafrican Moderator Gold Member

    Joined:
    Feb 11, 2016
    Posts:
    3,628
    Trophy Points:
    113
    Location:
    Canada
    Ratings:
    +2,890 / -11
    Also check the connection & harness going to the transmission
     
    Awafrican, via a mobile device, Feb 22, 2020
    #3
  4. Ssinstaller

    Ssinstaller Greenie Member

    Joined:
    Mar 16, 2017
    Posts:
    129
    Trophy Points:
    28
    Location:
    Nc
    Ratings:
    +88 / -0
    The wire to test is in pin 1s(it's voilet)at the ECM. Should have 12v when the transmission is in any gear, and drop to ground in neutral.
     

    Attached Files:

    Ssinstaller, via a mobile device, Feb 22, 2020
    #4
  5. silas

    silas Greenie N00B Member

    Joined:
    Feb 22, 2020
    Posts:
    2
    Trophy Points:
    1
    Location:
    wisconsin
    Ratings:
    +0 / -0
    where is the switch located?
     
  6. Ssinstaller

    Ssinstaller Greenie Member

    Joined:
    Mar 16, 2017
    Posts:
    129
    Trophy Points:
    28
    Location:
    Nc
    Ratings:
    +88 / -0
    The switch is on the transmission.
     
    Ssinstaller, via a mobile device, Feb 23, 2020
    #6
Loading...

Share This Page

Users Viewing Thread (Users: 0, Guests: 0)