Suspensión differences

Discussion in 'Mazdaspeed 3 Suspension & Brakes' started by Jaris, Nov 6, 2018.

Watchers:
3 users.
  1. Jaris

    Jaris Greenie Member

    Joined:
    Jul 23, 2017
    Posts:
    11
    Trophy Points:
    3
    Location:
    Jacksonville, Fl
    Ratings:
    +1 / -0
    Is genwon and genpu coilovers/aftermarket suspension interchangeable? Do the bolts/holes line up the same? For further clarification, would I be able to take suspension from a genpu and put it on a genwon and vice versa (obvi)?


    Sent from my iPhone using Tapatalk
     
    Jaris, via a mobile device, Nov 6, 2018
    #1
  2. Mauro_Penguin

    Mauro_Penguin Punk in Drublic Gold Member

    Joined:
    Feb 10, 2016
    Posts:
    639
    Trophy Points:
    93
    Location:
    Jacksonville, FL
    Ratings:
    +648 / -1
    The front yes. The rear no.

    Gen1 onto Gen2 is ok, Gen2 onto Gen1 wont work because of the flange strap that hugs the shock bolt.

    If you want to measure it yourself and see go ahead, you could always grind down the lower shock mount too.
     
    Mauro_Penguin, via a mobile device, Nov 7, 2018
    #2
    • Like Like x 1
  3. Raider

    Raider Administraider Administrator Platinum Member

    Joined:
    Jan 28, 2016
    Posts:
    3,860
    Trophy Points:
    113
    Location:
    Behind a Keyboard wearing full body armor
    Ratings:
    +4,694 / -3
    Regular struts pu to won you will need washers, I think on back. Don't slap Racelands on there Jaris.
     
    Raider, via a mobile device, Nov 10, 2018 at 11:28 PM
    #3
Loading...

Share This Page

Users Viewing Thread (Users: 0, Guests: 0)