Figured I would do a quick write up on how to make your own EBCS since I don’t think there is one on here. Don’t go spending all sorts of money on...
@JohnnyTightlips is going PI and wanted to upgrade his fuel pump. Ended up sending me the parts to make him a basket set up like I had back in my...
Hey everyone, Im back on working to plan this year’s Midwest meet this is going to be a long post, so buckle up and get to reading. (also, Im...
I was looking a while ago, when I lost my tow hook, for the thread pitch of what ours were. Never was able to find a correct answer. Ended up...
As many of you know, I had a bit of a fire at the track a few months back. Car was a total loss. My plan at the time was to take all the money I...
Bought a new car that came with some mud flaps. I had made my own previously from some amazon basic flap kit, but just kinda guessed on how and...
I picked up a valve cover breather and ended up getting a bunch of oil pushed out the valve cover (I assumed it was going to happen, but I tried...
I found that I was missing my MAF sensor O-Ring. I assume that my MAF cal is not perfect because of this fact and I wanted to replace it. Dealer...
Does anyone know what size hose connects to the fitting below? I want to buy hose barbs today to replace my hard line that goes over the...
Im pulling my turbo and DP to swap them with a Tial hotside and a CPE downpipe (got that exclusive shit) When I was getting them all ready here...
Tracked the car this last Monday with my fancy new Wilwood brakes. Things got hot up front (600+ degrees on the rotor even after 1/2 a lap of...
Thanks to @DaUberSchwebel I now know there is a motorcycle section. Figured I can post in here and see if I can get some advice. I have a 1970...
Finally have my PI system up and running after a few hiccups. Talking with Will at PD tuning (@Captain KR) I mentioned how I somewhat built up...
A while back when I was building my motor, it looked like a huge PITA to try and torque the crank bolt. I saw a couple solutions, but ended up...
So my car isn't a full on racecar (yet) But I do take it to the track, and during which I like to have a fire extinguisher. The giant methanol...
So obviously a running engine will get hot, and that is exacerbated at places like the track. Ive had issues where my engine bay in august is...
Starting a new thread as I this is a new issue. I started a previous thread for an issue I was having with fuel pressure:...
So I'm just starting to trouble shoot but I figured I would ask here. My car has been sitting for a few months and I just finally got it all back...
So Ive been working on making my own PI system. I have a JMF manifold, some 630CC injectors, a split second controller, fuel pressure regulator,...
So I dont know if this is the right place to put this or not, so feel free to move it if not. Ive been asked for my timing tools drawings that I...
Separate names with a comma.