I've had the best luck with reused injectors, sans cleaning. [I did buy all new injectors for this latest build, though.] Honestly, the cleaning...
I wouldn't worry about a light whine at cruising speeds. Probably just a little bit of wear on the gears making noise - won't hurt anything....
PRV Injectors I've had both fail. When the PRV fails, you can typically blow through them or hit them with compressed air and they'll leak....
Things are getting...complicated. I can't trust that the hydramats won't allow air through in dynamic situations. They suck air during transient...
I've never really cared about them, the stock bolts work just fine - I must have junked the last head with injectors and hardware intact, so I...
Yeah, I contacted Majin and he's in Bulgaria, so none available. I did price it out from McMaster and it's approaching kit cost, anyway...so I...
Anything ever come of this?
I'd check engine mounts first.
We did some testing with the hydramats over the weekend to get a feel for how they worked and if they had any weird issues we need to be aware of....
I have a cheap ebay tubular mani swain tech coated and it's lasted several seasons. I think you'll be fine. I'm planning to add some stainless...
The swain tech coating explodes if water touches it while hot. Leaves little pock marks. I suspect all of the ceramic coatings act similarly,...
That's where I'm going with this :D We've been out of the MS6 for two years, so in a month or two we will try it out.
Yep, that's right. But honestly, if it's holding 800lbft at half its normal operating voltage, you could probably rely on it to hold something a...
Diff coupler is a hot topic, but let's take a look at the system from transfer case to rear diff output first. We know the transfer case is all...
One of the most nebulous topics for the MS6 since it came out was how the AWD system worked. How it transfers power to the rear wheels, how much...
Separate names with a comma.
