About 2 weeks ago I bought a 2008 Mazda speed 3 with 184xxxkms. Test drove it and all went well. On the drive home the bov came out of the hose,...
Hey guys! So ive been dealing with this misfire for a while now and cant seem to find whats causing it. Symptoms are lots of backfiring and...
Hey guys, I am new here, so I apologize if I'm not doing this right... So, a while ago, I was driving around and punched the throttle, car...
Ok so first off will start by saying I am far from an expert but also not a complete noob so like to tell people I know just enough to know I...
Hey guys, so I've been having some issues with my speed 3 lately and I'm struggling with figuring out what it is. So the car runs smooth at idle...
ENGINE/DRIVABILITY Year/Make/Model: 2013 mazdaspeed 3 Mileage: 141000km Location: montreal, QC Concern: No power, enters limp mode(flashing CEL)...
My MS6 has developed a misfire on cylinder three and threw both p0300 and p0303 codes. The spark plugs are all good and gapped within factory...
Just bought my first speed about two weeks ago so Im sorry if I come off noobish in this post Year/Make/Model: 2008 Mazdaspeed 3 Mileage: 123000...
Howdy Today I got my 2006 MS6 from the shop as I left it for a lookup and cause in 4th and 5th gear mostly, on high boost, ie under high load,...
I had a random misfire on stock hpfp internals, so I figured I needed better fuel flow, upgraded that everything is fine with it, still having the...
Okay, I have done a lot of research and posted on multiple forums but I am stuck. Preface: 2007 Stock Mazdaspeed3 with short ram intake. Bought...
For the longest now ive been having a cylinder 4 misfire that will come and go out of random. Ive gone through and replaced a ton of hardware(...
Hello all! I've had my speed3 for some time now but I'm new to this forum specifically because I could use some outside advice. My car has...
Hey guys - just created an account on here, but I was a member on the mazdaspeedforums for quite some time. I'm trying to see if anyone would...
Hey there, I’m having a problem with my 2008 Speed 3. When I’m travelling along the highway with cruise control on and I go on a slight incline,...
I've come here as a last resort. Heartbroken over months of trial and error. Recently had the engine replaced, and had put in an Autotech HPFP....
My 2007 Mazdaspeed3 has been running very rich. You can drive it but I avoid to right now as it will stall at idle sometimes. My AFRs at Idle will...
1. Alright guys, I need help and am at a loss of what to do. If you want to get straight to the issue that I'm seeing, go to paragraph 3. Let me...
So I recently decided to spice up my life and buy a 2007 MS3, but I have a problem. I'm experiencing misfires at idle, and it will throw a code...
Cel misfire in cylinder 3. I pulled the new plugs found some oil on them then ran a compression test. 180/90/0/180. The first test for Cylinder 2...
Separate names with a comma.