Yeah unfortunately Midwest Control is no longer a viable option for most. This thread isn't really as useful as it used to be. There's the...
What I meant by that was that I could push down on the back of the car quite easily and compress the shocks. It wasn't caused by the Bilsteins,...
I checked for exhaust leaks by the turbo today and found some, so I tightened the bolts I could get to (vband was in the way of some). The car now...
I'll probably get one ordered and plan on replacing it no matter what. The new downpipe is so much easier to get out it shouldn't be too big of a...
I did, I used the supplied one, which I know aren't the greatest, but it's what I had. If that's the case though, it could also be the vband,...
First off, short mod list. Stock engine, BnrS3, 3 inch intake, HPFP internals, magnaflow catback, tuned with Versatune, and now, a catless...
I was able to compare the stock tune and and the 93oct crackle tune and very easily see the differences. The option for disabling decel fuel cut...
How would we go about implementing this into a custom tune? I tried the "disable fuel cut on decel" checkbox under options and reflashed, but...
60-100, 7.367s MS6, BNRS3 v1, 3 inch intake, Corksport TMIC, Test Pipe, Magnaflow catback, HPFP internals, stock downpipe, 93 Octane. 21psi of...
I'm pretty sure I have a BNR S3 that's slower. Seeing your post is starting to make me think there's something wrong with my car lol. Maybe I have...
It would appear that their website has changed drastically. They used to have an option to build your own custom cables with an online...
It's been a while since I've flashed a tune to my car, but I believe those codes are caused by a bug with the mazdaspeed 6 ecu during flashing, if...
The map sensor setting in the Intake Manifold Absolute Pressure gauge had me freaking out searching for boost leaks for something like a week and...
Nice! The adjustment is kind of a pain, but totally worth it. Did you by chance use loctite where the cable bulkheads attach to the bracket? One...
If you draw a line from the 5/8 hole it should equally bisect the two mounting holes, it's not critical, just get it close. The overall dimensions...
The 2 3/8" is how high above the base plate the holes for the cable bulkheads are. Different holes than the ones that attach it to the...
It's an oval hole, just like on the factory bracket.
You can do a 3" with the stock size battery but you will have to cut the tray to make it fit, and the JBR at least just barely fits. That's what I...
The main issue with big intakes on the MS6 is the battery. I barely got a JBR 3 inch to fit with the stock size battery and tray. A 3.5 inch with...
I've yet to see anyone put up numbers or attempt this on an MS3. The distance from where the cables attach to the shifter cage to the end fitting...
Separate names with a comma.