So I just wanted to add a thread here because when I was researching this there was little info about it (none on here that I saw). So while I...
Just wanted to update this thread replacing the gaskets on the oil cooler and filter housing fixed my leak.
Check around your oil filter housing by the oil cooler. I just found a leak from the gasket on mine. I was seeing random drips though, but only...
Yep slowly, but surely haha. I'm actually gen pu haha 2012. I did a little research and couldn't find people with gen pu's that leaked, but like I...
Just a quick update. I adjusted preload one full turn and my boost is at 13.4 PSI now. Took off the intercooler to see what is going on a bit. I...
The k04 did, cst 4 is not. I did a boost leak test and I could hear the turbo dumping pressure back into the intake once I got up to 10 psi. I’m...
Yeah I guess its worth a shot just wondering if other people have had to do it? Kind of wish the install manual told me to double check it ha....
Ok Justin told me to adjust the preload on the wastegate. I guess my logs looked Ok to him. Is this a common thing? I didn't mess with it and I...
Thanks man! I was mainly worried about it because Justin said I should expect 14-17 PSI with the base map.
It does settle down to around 5 after driving for a bit on the highway, but then lives 3-7 a bit. Then when I get on it it'll be at 7 for like 1-2...
Thanks you made me feel a little better about my situation!
car drives pretty good to be honest. The EBCS (waste gate duty) sticks on 0 the entire time I’m driving. It blips to 1 when I start it up. So that...
I installed a cst4 turbo and have a base tune from Justin at Freektune. My other mods relevant mods: Accessport, Autotech fuel internals,...
Separate names with a comma.