If there’s a little pitting at the bottom of the chain tensioner guide is that a problem?
How do i do that if the oil pump sprocket is cover by the timing cover?
In the original write up it said that you weren’t able to remove the oil pump sprocket to replace the third friction washer. Isn’t that risking it...
I bought them anyway for piece of mind. Thanks.
Did you reuse the bolts on the cams?
Did you have any problems with the timing chain tightness when you didn’t loosen the cam bolts and put it all back together?
When you say alll oem bolts are tty which one’s exactly are you referring to? Every bolt that holds all the timing components together under the...
How did you make out with this project? Im going through a timing cover reseal because of a major oil leak.
[ATTACH] I found it today. It’s right behind the ps pump and its pretty bad. Im thinking either head gasket or injector seal possibly but not...
Hey guys i have an oil leak on the passenger front and side of the motor after some hard pulls while data logging for my e45 map. Im wondering if...
Definitely looking into another controller because I can’t get this one to power up without grounding it out. Definitely looking into the...
When you say backwards can you explain?
Anyone ever have a working SP63 aux fan controller? I bought mine used and even had the pots replaced and the fans still haven’t turned on yet....
What failed on the SP63 fan controllers you had everytime? Im having issues with mine not firing up the fans.
Still running this setup?
Bought it lifted so probably leaving it alone for now.
[ATTACH] 193,000 3” lift 285/70/17 Sequoia wheels. Runs great and good enough for hauling firewood.
Finally after a year in my basement I installed it this weekend.[ATTACH]
So update on pulley is that the driving temps definitely drop faster but idle temps are only different by 5-10 degrees. Im happy with it overall...
Hey guys im trying to figure out which way these injectors fit into the jmf manifold. They are id1050’s and they come with a removable black...
Separate names with a comma.