Alrighty... After a bunch of research and waiting a few days on DHL International; she's fixed and running great again. TLDR: If you're replacing...
Does anyone know the legit Bosch fuel rail pressure sensor that can replace the stock one? I tried a knockoff brand because my stock sensor was...
Spill valve wiring seems to checkout. I'll be doing a deep dive into the wiring harness in the next couple days. I rebuilt and installed the Auto...
Scratch that the tune I flashed was on old version that didn't have the sensor cal values for the CS MAF sensor... Flashed again to the correct...
Terminal B (red wire) voltage when running, 9.7 Terminal A (blue wire) voltage when running, 9.0 *** IGNORE: Just reflashed a tune, STFT were in...
Couple of Workshop Manual tests: No short to ground from Spill Valve Terminal B to PCM 2F No short to ground from Spill Valve Terminal A to PCM...
B+ refers to the voltage before any drops in the system. In the case of a normal passenger car, that's 12 volts. Sent from my Pixel using...
I actually added a ground, in addition to the little one in the coil harness. 8awg directly from the stock point on the fender. Using a...
Here's some video: After first startup: [MEDIA] After a minute, I unplugged the spill valve to see what the AP pressure would show, it dropped...
First koeo of day. What AP says vs. fuel pressure gauge.[IMG][IMG] Sent from my Pixel using Tapatalk
Just lost light here in Texas. I'll do it first thing in the morning. Sent from my Pixel using Tapatalk
TPS and APP were both fluctuating with the three little blips I did during the log. And I tuned me. Same tune for four years. Hybrid tune based...
Car: 2008 Speed3; 3.5" intake, CS turbo back, AT internals, Reyes Wiretuck, AP v3, (Same tune for years), Damond PCV plate with dual CCs. 180...
I haven't really tried anything else. From the YouTube videos I watched, Ford guys use it to change tire size to correct the speedo, or locking...
Separate names with a comma.
