I just switched from IWG to EWG and dumped it down below. It is crazy loud and does sound a bit like a machine gun with the flutter. I thought...
Boost gauge was installed a few weeks ago and I tore into the rear seat to try and figure out why the fuel gauge is reading incorrectly. It seems...
I was more curious about HP. I read somewhere that they didn't provide specific numbers so I was just curious. That is what is in the car I...
What is the rating on the fx400?
I bought a new to me MS6 and I recently ran out of gas with just over a quarter of a tank. I filled up and the gauge was almost 1/4 tank over the...
Definitely think 4th gear is gone and you mentioned your crank bolt was loose so I think you may have skipped timing possibly as well. I think...
I got the car aligned last week and the suspension has settled in nicely. I also added about 4 turns of preload to my wastegate actuator arm so...
Your loose crank bolt has nothing to do with your free revving grenaded trans. Your flywheel is screwed as well as at least 4th gear. Seems you...
I snapped a couple daytime pictures. I need to get an alignment in the next few days but I'm happy with how it is settling in. [ATTACH] [ATTACH]
Well I typed up a really nice post and as soon as I went to post it, it got erased so...here we go again. I got these brand new traklites and 0...
Well I have some 17s for sale now. Got this whole setup with 0 miles for less than the rims or tires would have cost alone. [ATTACH]
So I posted a few weeks ago about my HUGE fender gap. PO says he installed the lower perch on the Bilstein B6s upside down. I pulled it out...
So I've been at a stand-still because I had a severe boost/vacuum leak somewhere. I figured out the leak was coming from a port on the side of...
The PO installed the Bilsteins with the perch upside down so it is even worse than stock. I figured if I have to pull them anyway I might as well...
Separate names with a comma.