So I did the FPRV test the right way last night and it climbed to 1813 the first time and then I could see the drop off and then watched it again...
So Enki if I'm understanding you correctly, if I have a low pressure side fuel volume/pressure issue it's going to become very evident in my...
I'll re test after I get a revision from Will I really don't want to drive the car any more than I have to with the way it's running. Honestly...
Thanks Enki, yeah I knew you had to do it on a hot engine as that's the mechanism for expansion as you mentioned. I did this after it had been...
Well I picked up the car and took it for a drive per my tuners instructions. Drove it 20 miles then proceeded with all my base map logs. Only...
Ahh the loose seat, my 13 has it also need to pull the seat out of the car and take a look at whatever the hell fails and fix it. From what I've...
That's what pretty much what Will said. He called me back this morning on the way to Cars and Coffee and was super cool on the phone. I've had a...
Heard back from tuner this morning and explained everything. Told me he isn't worried and I've done everything he would have asked to ensure the...
Enki, I haven't sent a log to the tuner yet documenting this issue as I haven't heard back yet. I will be at the shop tomorrow for a Cars and...
I appreciate you responding 337, I'll have to ask about some of the things you've mentioned tomorrow. The guy working on this is a very...
Well car is still not fixed! So we replaced the MAF with a Denso unit, the Primary 02 has been replaced with a NTK/NGK unit and the EGR valve...
[ATTACH] It's a bolt holding down a small 16 guage wire attached to a metal tab. I had trouble with mine after I did my first intake valve...
Can attest to that one, gave me one hell of an ass kicking!
I'm running them and they are top notch! Had zero problems getting them out when I rebuilt the motor!
It's on a basemap from my tuner so yes the 3.5 intake, 3 BAR MAP and S3 as well at DP are accounted for. Smoke went right into the intake where...
Separate names with a comma.
