did that bushing ever fix issue? I'm having same exact problem now on my completely stock speed 3 hard to put into 1st or 2nd gear what's that...
I'm also have -25 fuel trims with no resolve
ya alil over 200 psi all across the board
cylinder 3 failed leaking thru exhaust valve and cyl 4 moderate thru intake valve not so sure that is my issue tho
waiting to borrow a leak down tester to see what's going on I did notice cyl 1 2 and 3 looked wet on top piston. like unburnt fuel piston 4...
pulled intake off. it's not broken the switch above looks like is getting stuck. only I saw kinda off was the grommet or lock for pcv valve was...
getting code p2006 imrc stuck closed (which moves when actuated thru scanner) and p2188 systems too rich at idle
I resmoked it again. all i can see is some smoke coming out of trans (assuming rear main seal) is here a video of it idling. this is the best it...
o interesting! ya mine smokes alot too which it didn't do before!
sorry just noticed I totally posted wrong kink it's these I bought...
they sent with no paperwork. just says they were reman. it's why I kinda believe it's injectors but what is the chance of all 4 being off. brand...
https://www.ebay.com/itm/10-12-Mazdaspeed3-Fuel-Injector-Set-Speed-3-MS3-OEM-2010-2012-/302648980323?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l4928...
only one I saw was at turbo inlet and I fixed that after smoke testing it
think so? so even if there is a massive leak the trims are pulling -25 fuel?
so I have a gen 1 with about 160k miles. I recently replaced the injectors for a misfire. got a set of injectors reman from eBay (not sure if...
Separate names with a comma.