Yes the plunger is there and everything is connected and installed properly. EVERYTHING I could possibly think of, I've checked and rechecked and...
I'm at the point of saying I'm done....... I have completely rebuilt my motor, replaced high pressure fuel pump, place fuel rail, injectors,...
Semi-similar issue but I have completely rebuilt my motor, replaced high pressure fuel pump, place fuel rail, injectors, replaced every possible...
Man I'll have to check all of my numbers but this is seriously almost the exact same spot on issue in having.
So no matter what since I changed turbos from stock to something a little bigger, I HAVE to tune my car? I'm really trying to clear up the whole...
OK so definitely made sure I had all of my bolts in my intake manifold.... I am wondering what washer you are talking about between the block and...
Yes I made sure to replace all bolts to the intake manifold but I have to ask................ What washer....? (lol but seriously not loling) I...
So I had a quick question due to my ignorance on the subject. If I upgrade my Turbo from my stock one, do I need to flash my ECU? I recently...
Fuel rail pressure relief valve has been replaced and still not getting pressure beyond, we will say 50psi as the median number and drops to 43...
I mean the spill valve is part of the high pressure fuel pump is it not? I replaced the whole HPFP, splll valve and all. i am going to check my...
I replaced the whole pump all together.
Ok I replaced the HPFP, and still only getting between 40-50 psi FRP. When trying to start the car it won't budge past 40-50psi either. What would...
Ok so went ahead and changed out my hpfp and housing, also changed the fuel rail and my psi went from a whole 8psi KOEO to 52 psi. Car still won't...
My exhaust cam was 180° out originally which was corrected, I'm going to remove my VC and make sure my cams are positioned same as in the link...
So I'm new here and honestly kinda new to the mechanic life but I know a little more than someone with no knowledge at all. So I have a 2007 Mazda...
Separate names with a comma.
