AP SUPER TIG GASKETS BACK IN STOCK - SINGLE RUNNER VERSION COMING

The Super tig gaskets are back in stock. I also have throttle body gaskets but those are in need of a little bit of testing before I start selling them.





The single runner version should be released by the end of the month.

Find them here

http://adaptedperformance.com/produ...ngine-mrf-metal-reinforced-fiber-viton-rubber

http://adaptedperformance.com/produ...tal-reinforced-cellulose-fiber-slash-silicone

A little info on the Super TIG

Our gasket is made of .093 thick Metal reinforced cellulose fiber / silicone. Our gasket features a thin steel center with fiber on each side. The fiber material is an excellent at sealing and keeping the heat from the cylinder head from passing to the intake manifold. The steel core is excellent at making this gasket extremely durable and make sure it won't creep or distort over time.


Our gasket has a lower thermal conductivity than PTFE which makes it a better thermal gasket

Our gasket will not distort, creep, or blow out. Guaranteed!

Our gasket is able to be reused 3-5 times.

Includes a washer to space out the lower intake manifold mounting bolt. (Optional on single runner gasket kit)

Also includes a stud & nut to use on the lower intake mount instead of a bolt to make installing the spacer washer easier.(not pictured) (Optional on single runner gasket kit)

Owning a direct injected motor, it is inevitable that you will be removing your intake manifold for periodic valve cleanings. This is the perfect time to upgrade the intake manifold gasket to our thermal insulating gasket and drastically cut down on the heat that transfers between the cylinder head and intake manifold. Cooler air = more power & longer engine life.

TECH
The oem stainless steel gasket has a thermal conductivity rating of ~ 16 w/(m k)

Ptfe gaskets have an excellent thermal conductivity rating of ~ .25 w/(m k)

Our gasket material has an even better thermal conductivity rating of ~ .19 w/(m k)

Our gasket is .093 thick

The oem gasket is only .010 thick

The SUPER TIG is over 9 times thicker.​

 

I dislike you, but only for the fact that I will be spending my money on this when I get my stock intake manifold ported.

Thanks.

tapatalk, it sucks

 

Fapfapfapfapfapfap

 

Now to sell my other TIGs

 

@Maisonvi single runner TIG

 

Any ETA on when these will be in stock? I have a project where my old PTFE one may need replacing coming up.

 

How come the gasket can only be reused 3-5 times?

 

The material used, although structurally stronger and better insulating than ptfe has limitations. The gasket material can be over compressed and may not seal well if used more than the 3-5 times.

 

Picked up the first batch of these. Single runner gasket. Have some testers in line for them.

 

I have both standard and single runner gaskets. Shoot me a pm.

 

@bRitzCrackers you may want one of these single runner ones now.

 

I am in for one of these but u guys cant ship till july 5th?

 

I'm still getting set up after the move, but I'm going to slowly start opening up the web site for orders soon. I pushed back the full reopen to july 5th because I wanted to give as much time to be organized as I could. If you need a gasket shipped asap, send me a pm.