Introducing VersaTuner Lite, VersaTuner Free, and OBDLink SX support

Discussion in 'VersaTune' started by steve@versatune, Mar 29, 2019.

  1. steve@versatune

    steve@versatune Approved Vendor

    Joined:
    Apr 25, 2016
    Posts:
    72
    Trophy Points:
    33
    Location:
    Detroit, MI
    Ratings:
    +181 / -0
    First some history.

    When we started VersaTune 10 years ago, there was only one tuning solution for Mazdaspeed6. It cost over $700. We felt that was too much. So, we started VersaTune and launched VersaTuner at $399 plus the cost of a Tactrix OpenPort 2.0 J2534 pass-thru cable which cost $169 at the time. The total cost of VersaTuner and the cable was $568. After a few years, we were able to source our VersaLink cables based on the industry leading DrewTech Mongoose Pro. We offered a bundle of VersaTuner plus VersaLink for $549, which we still sell today. That's nearly $200 less than what a tuning solution cost when we started.

    We didn't stop there. We are proud to introduce VersaTuner Lite and support for OBDLink SX cables in all of our personal versions of VersaTuner.

    VersaTuner Lite includes all of the features and functions of the full VersaTuner with these limitations:

    • Tune Editor is disabled.
    • VersaTuner Lite can only flash tunes created by VersaTune, LLC or an Authorized VersaTuner Pro Tuner.

    VersaTuner Lite is available now from VersaTune or any VersaTune Authorized Reseller for just $249.

    Also, with today's release of VersaTuner and VersaTuner Lite, OBDLink SX cables are supported for all functions including logging, DTC management, and flashing tunes. OBDLink SX can be purchased from scantool.net for $29.95.

    You can now have a full featured custom tuning solution for just $429 with VersaTuner and OBDLink SX. If you are only interested in flashing one of our off-the-shelf tunes or you want to get a custom tune from a VersaTuner Pro tuner, you can get VersaTuner Lite and OBDLink SX for just $279.

    We are dedicated to improving the tuning experience and increasing the value of our tuning solution. We have reduced the cost of tuning your Mazda by over $300 all while adding new features. And we're not stopping now :)

    Still undecided? Want to see what VersaTuner looks like? Try the VersaTuner Free edition. VersaTuner Free uses the same VersaTuner user interface to enable log recording, live dashboard, log viewing, and DTC reading and clearing. It's a great way to get a feel for VersaTuner at no cost. J2534, OBDLink, and generic ELM bluetooth interfaces are supported.

    Read more and order now at https://www.versatuner.com
     
    • Like Like x 2
Loading...

Share This Page

Users Viewing Thread (Users: 0, Guests: 0)