Leak

Discussion in 'Mazdaspeed 3 Troubleshooting' started by 08ms3zoomzoom, Mar 1, 2025.

Watchers:
3 users.
  1. 08ms3zoomzoom

    08ms3zoomzoom Greenie Member

    Joined:
    Nov 15, 2020
    Posts:
    10
    Trophy Points:
    3
    Location:
    California
    Ratings:
    +1 / -0
    Hey everyone, was getting my car ready for tuning and looking over any sort of leaks. Has anyone leaked from the intake manifold to brake booster? If so what’s the fix?
     

    Attached Files:

    08ms3zoomzoom, via an iPhone, Mar 1, 2025
    #1
  2. Awafrican

    Awafrican Moderator Gold Member

    Joined:
    Feb 11, 2016
    Posts:
    3,997
    Trophy Points:
    113
    Location:
    Canada
    Ratings:
    +3,184 / -11
    push it in harder? it has an oring on it right? might need a new one
     
    Awafrican, via a mobile device, Mar 1, 2025
    #2
  3. 08ms3zoomzoom

    08ms3zoomzoom Greenie Member

    Joined:
    Nov 15, 2020
    Posts:
    10
    Trophy Points:
    3
    Location:
    California
    Ratings:
    +1 / -0
    Replaced the o ring it’s in there and it’s in there real good. Saw another post where they had said to tap it and put an adapter on it . But no other info.
     
    08ms3zoomzoom, via an iPhone, Mar 1, 2025
    #3
    • Like Like x 1
  4. ExtremeCaliber

    ExtremeCaliber Greenie Member

    Joined:
    Dec 7, 2023
    Posts:
    71
    Trophy Points:
    8
    Location:
    USA
    Ratings:
    +24 / -0
    Wondering where you sourced your o-ring from? Tracking down vacuum leaks on my end aswell
     
  5. 08ms3zoomzoom

    08ms3zoomzoom Greenie Member

    Joined:
    Nov 15, 2020
    Posts:
    10
    Trophy Points:
    3
    Location:
    California
    Ratings:
    +1 / -0
    Sorry for the late very late reply. I sourced it from McMasterCar. It’s a square oring but it didn’t end up working. Had to drill and tap the hole and put an adapter piece on there. Ran a 3/8in hose from it to the fitting from the brake booster.
     

    Attached Files:

    08ms3zoomzoom, via an iPhone, Mar 30, 2025
    #5
Loading...

Share This Page

Users Viewing Thread (Users: 0, Guests: 0)