Snow Performance Stage 2 install question

Getting ready to install my SP Stage 2 kit. What boost level should I set the controller to start spraying and max flow boost? My current map is a reverse taper 26 psi boost target.

 

It's anyone's guess as to what you actually set the controller to as the hatch marks on the little knobs are 4..... 19 within a half inch. I set my system to start at 9 and 100% at 16psi. Max boost I see is 24-25psi.

 

FWIH, adjust to start spraying at half of max boost (so 13psi), and set to full spray at 3/4 of max boost (so ~19.5). Those are good rule-of-thumb starting points. Depending on the mix you run, if you feel bogging, have other issues, etc., then you may have to adjust it more.

 

Thanks guys will do. Mr. Finkle will do the tuning on my car.