Stalls at idle

Discussion in 'Mazdaspeed 6 Troubleshooting' started by RewbenMS6, Nov 21, 2020.

Watchers:
2 users.
  1. RewbenMS6

    RewbenMS6 Greenie N00B Member

    Joined:
    Nov 21, 2020
    Posts:
    5
    Trophy Points:
    1
    Location:
    Conover, NC
    Ratings:
    +0 / -0
    So Im having some stalling at idle problems. When ot stalls it's thrown a P2188 CEL. I've changed my fp relay and the fp resistor and it made the cel go away but only for a few days, then it came back as did the stalling at idle. As I'm monitoring suff on my ap I noticed the the hpfp sensor voltage os reading 0volts and stayed that way they entire drive home.... What causes this and could this be the cause of my random stalling at idle. Also when is says hpfp sensor do they mean the fuel rail pressure sensor any and all help would be amazing. I also have a new in tank fp I'm putting it to see if that help cause I was told by someone on a fb group they had the same issue and replaced the relay, resistor box and in tank fp and that fixed it but just trying to cover all my bases
     
    RewbenMS6, via a mobile device, Nov 21, 2020
    #1
  2. Easter Bunny

    Easter Bunny Professional Engineer Motorhead Platinum Member

    Joined:
    Feb 11, 2016
    Posts:
    3,325
    Trophy Points:
    113
    Location:
    Earth
    Ratings:
    +3,617 / -19
    Don't put any more hard parts on it. You have a sensor issue
     
    Easter Bunny, via a mobile device, Dec 10, 2020
    #2
Loading...

Share This Page

Users Viewing Thread (Users: 0, Guests: 0)